The Role of Local Microstructure on Small Fatigue Crack Propagation in an α plus β Titanium Alloy, Ti-6Al-2Sn-4Zr-6Mo

被引:20
|
作者
Szczepanski, C. J. [1 ]
Jha, S. K. [2 ]
Larsen, J. M. [1 ]
Jones, J. W. [3 ]
机构
[1] USAF, Res Lab, Mat & Mfg Directorate, AFRL RXLM, Wright Patterson AFB, OH 45433 USA
[2] Univ Technol Corp, Dayton, OH 45432 USA
[3] Univ Michigan, Mat Sci & Engn Dept, Ann Arbor, MI 48109 USA
来源
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 2012年 / 43A卷 / 11期
关键词
HIGH-CYCLE FATIGUE; CRYSTALLOGRAPHIC ORIENTATION; LIFE PREDICTION; HOT-WORKING; TI-6AL-4V; INITIATION; TEXTURE; FRACTURE; GROWTH;
D O I
10.1007/s11661-012-1228-z
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Microstructural origins of the variability in fatigue lifetime observed in the high- and very-high-cycle fatigue regimes in titanium alloys were explored by examining the role of microstructural heterogeneity (neighborhoods of grains with similar crystallographic orientations or microtexture) on the initiation and early growth of fatigue cracks in Ti-6246. Ultrasonic fatigue of focused ion beam (FIB) micronotched samples was used to investigate long lifetime (10(7) to 10(9)) behavior for two microstructural conditions: one with microtexture and one without microtexture. For specimens containing notches of nominally 20 mu m in length, fatigue crack initiation in the microtextured material was most likely to occur from notches placed in neighborhoods with a microtexture favorably oriented for easy basal slip. Initiation lifetimes in the untextured material with similar sized notches were, on average, slightly greater than those for the microtextured condition. In both materials, the crack-initiation lifetime from micronotches of length 2c > 20 mu m was a very small fraction (< 1 pct) of the measured fatigue lifetime for unnotched specimens. Furthermore, in the microtextured condition, small fatigue crack propagation rates did not correlate with the microtextured regions and did not statistically differ from average small crack growth rates in the untextured material. As the micronotch size was reduced below 20 mu m, fatigue crack initiation was controlled by microstructure rather than by FIB-machined defects. Finally, predictions of the fraction of life consumed in small and long fatigue crack growth from preexisting cracks nominally equivalent in size to the micronotches was compared with the measured fatigue life of unnotched specimens. The predicted range of lifetimes when factoring in the experimentally observed variability in small fatigue crack growth, only accounted for 0.1 pct of the observed fatigue lifetime variability. These findings indicate that in the high-and very-high-cycle fatigue regimes, fatigue life is dominated by crack initiation and that the variation in the initiation lifetime is responsible for the observed variation in total fatigue life.
引用
收藏
页码:4097 / 4112
页数:16
相关论文
共 50 条
  • [1] The Role of Local Microstructure on Small Fatigue Crack Propagation in an α + β Titanium Alloy, Ti-6Al-2Sn-4Zr-6Mo
    C. J. Szczepanski
    S. K. Jha
    J. M. Larsen
    J. W. Jones
    Metallurgical and Materials Transactions A, 2012, 43 : 4097 - 4112
  • [2] EFFECTS OF MICROSTRUCTURE AND TEXTURE ON FATIGUE CRACK-PROPAGATION IN TI-6AL-4V AND TI-6AL-2SN-4ZR-6MO PLATE
    BIDWELL, LR
    EYLON, D
    JOM-JOURNAL OF METALS, 1976, 28 (12): : A63 - A63
  • [3] INFLUENCE OF MICROSTRUCTURE ON FATIGUE CRACK GROWTH-RATES IN TI-6AL-2SN-4ZR-6MO
    BIDWELL, LR
    CHAKRABARTI, AK
    JOM-JOURNAL OF METALS, 1975, 27 (12): : A58 - A58
  • [4] SUPERPLASTICITY IN TI-6AL-2SN-4ZR-6MO ALLOY
    HASEGAWA, A
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 : 1610 - 1610
  • [5] Environmentally assisted fatigue crack nucleation in Ti-6Al-2Sn-4Zr-6Mo
    Chapman, T. P.
    Chater, R. J.
    Saunders, E. A.
    Walker, A. M.
    Lindley, T. C.
    Dye, D.
    CORROSION SCIENCE, 2015, 96 : 87 - 101
  • [6] HYDROGEN EMBRITTLEMENT OF TI-6AL-2SN-4ZR-6MO ALLOY
    NIINOMI, M
    SUZUKI, K
    KOBAYASHI, T
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 26 (08) : B286 - B286
  • [7] HYDROGEN EMBRITTLEMENT OF TI-6AL-2SN-4ZR-6MO ALLOY
    NIINOMI, M
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (05): : S738 - S738
  • [8] Microstructure and microhardness of heat-treated Ti-6Al-2Sn-4Zr-6Mo alloy
    Stella, Piergiorgio
    Giovanetti, Iacopo
    Masi, Gabriele
    Leoni, Matteo
    Molinari, Alberto
    JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 567 : 134 - 140
  • [9] Development of a Free-Machining (+) Titanium Alloy Based on Ti-6Al-2Sn-4Zr-6Mo
    Hussain, M. S.
    Siemers, C.
    Roesler, J.
    MATERIALS AND MANUFACTURING PROCESSES, 2013, 28 (05) : 545 - 549
  • [10] Anisotropy in the tensile behaviour of Ti-6Al-2Sn-4Zr-6Mo alloy
    Corzo, M
    Manero, JM
    Anglada, M
    Mateo, A
    REVISTA DE METALURGIA, 2005, : 401 - 406