Microstructure characterization of Ti-6Al-4V titanium laser weld and its deformation

被引：12

作者：

Xu Pei-quan ^{[1
]}

机构：

[1] Shanghai Univ Engn Sci, Coll Mat Engn, Shanghai 201620, Peoples R China

来源：

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2012年 / 22卷 / 09期

基金：

中国国家自然科学基金;

关键词：

titanium; laser welding; deformation; mechanical properties; ALLOYS;

D O I：

10.1016/S1003-6326(11)61437-4

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Slip deformation in Ti-6Al-4V titanium laser welds was observed. Laser welding was used to prepare the titanium welds. Macrostructure, microstructure, mechanical property and structure of laser welds were studied using optical microscope, scanning electron microscope, compression experiment, transmission electron microscope (TEM) and high resolution TEM. Subsequently, slip deformation mechanism occurred in fracture and etched weld was discussed. The results indicate that the maximum compression strength reaches 1.191 GPa. Slip deformation easily happens in titanium laser welds and the minimum slip bands are 600 nm and 75 nm respectively in fracture and etched laser welds.

引用

页码：2118 / 2123

页数：6

共 25 条

[1] Misorientations induced by deformation twinning in titanium [J].

Bozzolo, Nathalie ;

Chan, Lisa ;

Rollett, Anthony D. .

JOURNAL OF APPLIED CRYSTALLOGRAPHY, 2010, 43 :596-602

[2]

BRANDIZZI M, 2010, RIV ITALIANA SALDATU, V62, P177

[3] The effect of contamination on the metallurgy of commercially pure titanium welded with a pulsed laser beam [J].

Buddery, Alexander ;

Kelly, Patrick ;

Drennan, John ;

Dargusch, Matthew .

JOURNAL OF MATERIALS SCIENCE, 2011, 46 (08) :2726-2732

[4] DEFORMATION TWINNING [J].

CHRISTIAN, JW ;

MAHAJAN, S .

PROGRESS IN MATERIALS SCIENCE, 1995, 39 (1-2) :1-157

[5] Modelling and prediction of mechanical properties for materials with hexagonal symmetry (zinc, titanium and zirconium alloys) [J].

Fundenberger, JJ ;

Philippe, MJ ;

Wagner, F ;

Esling, C .

ACTA MATERIALIA, 1997, 45 (10) :4041-4055

[6] Laser Keyhole Welding of Dissimilar Ti-6Al-4V Titanium Alloy to AZ31B Magnesium Alloy [J].

Gao, M. ;

Wang, Z. M. ;

Li, X. Y. ;

Zeng, X. Y. .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2012, 43A (01) :163-172

[7] Sensitivity of deformation twinning to grain size in titanium and magnesium [J].

Ghaderi, Alireza ;

Barnett, Matthew R. .

ACTA MATERIALIA, 2011, 59 (20) :7824-7839

[8] Characterization of Dissimilar Linear Friction Welds of α-β Titanium Alloys [J].

Guo, Yina ;

Chiu, Yulung ;

Attallah, Moataz M. ;

Li, Hangyue ;

Bray, Simon ;

Bowen, Paul .

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2012, 21 (05) :770-776

[9] Coupled thermodynamic/kinetic model for hydrogen transport during electron beam welding of titanium alloy [J].

Huang, J. L. ;

Gebelin, J. -C. ;

Strangwood, M. ;

Reed, R. C. ;

Warnken, N. .

MATERIALS SCIENCE AND TECHNOLOGY, 2012, 28 (04) :500-508

[10] Influence of the filler metal on the properties of Ti-6Al-4V electron beam weldments. Part I: Welding procedures and microstructural characterization [J].

Irisarri, A. M. ;

Barreda, J. L. ;

Azpiroz, X. .

VACUUM, 2009, 84 (03) :393-399

← 1 2 3 →