Radioisotope Thermophotovoltaic Generator Design Methods and Performance Estimates for Space Missions

This work provides the design methodology of a radioisotope thermophotovoltaic system (RTPV) using spectral control for space missions. The focus is on the feasibility of a practical system by using two-dimensional micropatterned photonic crystal emitters, selecting the proper thermophotovoltaic cell and insulation material to exclude material incompatibilities, to optimize the system efficiency by impedance matching and to design a radiator with minimum mass. In the last section, a design example is presented based on the tested indium gallium arsenide antimonide (InGaAsSb) cells. It is shown computationally that, in using the experimentally tested InGaAsSb cells, the RTPV generator is expected to reach an efficiency of 8.6% and a specific power of10.1 W/kgwith advanced radiators. Using the more efficient InGaAs cells, the system can expect to triple the figure of merits of the radioisotope thermoelectric generator, promising to reach similar to 18%and21 W/kg, respectively. With a high performance device, the results of this work can lead to a functional prototype for further research focusing on manufacturability and reliability.