Rare-earth modified zirconium diboride high emissivity coatings for hypersonic applications

被引:76
作者
Tan, Winnie [1 ]
Petorak, Christopher A. [2 ]
Trice, Rodney W. [1 ]
机构
[1] Purdue Univ, W Lafayette, IN 47907 USA
[2] Praxair Surface Technol Inc, Indianapolis, IN 46222 USA
关键词
Thermal protection systems; Emissivity; Rare-earth oxides; Zirconium diboride; Plasma spray; PLASMA SPRAY DEPOSITION; SPECTRAL EMITTANCE; THERMAL-STABILITY; SILICON-CARBIDE; OXIDATION; ZRB2; AIR; COMPOSITES; CATALYCITY; DESIGN;
D O I
10.1016/j.jeurceramsoc.2013.07.016
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Sharp features of hypersonic vehicles increases heat transfer to the surface during flight. This thermal energy can be reduced via increasing the radiation and conduction heat transfer away from the surface. In this study, an emissivity modifier was incorporated into an ultra-high-temperature-ceramic coating system (ZrB2/SiC) to increase its surface radiation heat transfer rate by increasing the emissivity of the surface. The rare-earth were incorporated into the coatings via mechanical mixing Sm2O3 or Tm2O3 with ZrB2/SiC or chemically infiltrating Sm(NO3)(3)/ethanol solution into ZrB2/SiC. Coatings were fabricated using shrouded air plasma spray. Total hemispherical emissivity results show that the Sm(NO3)3 infiltrated ZrB2/SiC coating had a higher emissivity compared to the baseline ZrB2/SiC coatings up to 1200 degrees C. The thermal conductivity of all coatings presently studied was below 12W/m/K. The presence of rare-earth in the boria-rich surface glasses formed during oxidation increases the glass evaporation rate of the coatings compared to the ZrB2/SiC coating. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1 / 11
页数:11
相关论文
共 36 条
[1]   Emissivity and catalycity measurements on SiC-coated carbon fibre reinforced silicon carbide composite [J].
Alfano, Davide ;
Scatteia, Luigi ;
Cantoni, Stefania ;
Balat-Pichelin, Marianne .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2009, 29 (10) :2045-2051
[2]  
*ASTM INT, 2006, E146111 ASTM INT
[3]  
*ASTM INT, 2006, C83506 ASTM INT
[4]  
ASTM International, 2006, ASTM C373-88
[5]  
AVDOSHENKO S, STAIN ENHANCEM UNPUB
[6]   Plasma spray deposition and high temperature characterization of ZrB2-SiC protective coatings [J].
Bartuli, C ;
Valente, T ;
Tului, M .
SURFACE & COATINGS TECHNOLOGY, 2002, 155 (2-3) :260-273
[7]   Fifty years of hypersonics: where we've been, where we're going [J].
Bertin, JJ ;
Cummings, RM .
PROGRESS IN AEROSPACE SCIENCES, 2003, 39 (6-7) :511-536
[9]  
BUTTERMAN WC, 1967, AM MINERAL, V52, P880
[10]  
*CINDAS LLC, 2012, THERM PROP MATT DAT