High temperature tribological behaviour of TiSiN(Ag) films deposited by HiPIMS in DOMS mode

被引：29
作者：
Cavaleiro, D. [1 ,2 ]
Veeregowda, D. [3 ]
Cavaleiro, A. [2 ,4 ]
Carvalho, S. [1 ,2 ]
Fernandes, F. [2 ,5 ]
机构：
[1] Univ Minho, Phys Dept, CFUM UP, P-4800058 Guimaraes, Portugal
[2] Univ Coimbra, SEG CEMMPRE Ctr Mech Engn, Dept Mech Engn Mat & Proc, Rua Luis Reis Santos, P-3030788 Coimbra, Portugal
[3] Ducom Instruments Europe BV, Applicat Dev Lab, NL-9713 GX Groningen, Netherlands
[4] IPN LED & MAT Inst Pedro Nunes, Lab Ensaios Desgaste & Mat, Rua Pedro Nunes, P-3030199 Coimbra, Portugal
[5] Czech Tech Univ, Dept Control Engn, Tech 2, Prague 616627, Czech Republic
来源：
SURFACE & COATINGS TECHNOLOGY | 2020年 / 399卷
关键词：
TiSiN(Ag); HiPIMS; Tribology; High temperature; ADAPTIVE NANOCOMPOSITE COATINGS; YTTRIA-STABILIZED ZIRCONIA; SOLID LUBRICANT MATERIALS; THIN-FILMS; MECHANICAL-PROPERTIES; OXIDATION RESISTANCE; DIFFUSION; SI; TITANIUM; CONTACT;
D O I：
10.1016/j.surfcoat.2020.126176
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Self-lubricant coatings offer an opportunity to increase tool lives in dry machining operations for hard-to-cut materials. In this work, TiSiN(Ag) coatings were deposited to assess the influence of silver in the tribological behaviour at high temperatures. Two types of counterparts were used: 6 mm diameter Al2O3 and TiAl6V4 balls. RT tests conducted against Al2O3 balls showed that silver slightly decreases the friction but deteriorates the wear resistance. Wear resistance is improved when the temperature is increased to 600 degrees C, when compared to RT tests. Tribology tests against TiAl6V4 balls showed that silver has a beneficial effect in the reduction of friction and wear. Additionally, silver hinders the adhesion of material to the wear track. Temperature also plays an important role in propelling the effects of silver.
引用
收藏
页数：11
相关论文
共 53 条
[21]   Ta2AlC and Cr2AlCAg-based composites -: New solid lubricant materials for use over a wide temperature range against Ni-based superalloys and alumina [J].
Gupta, S. ;
Filimonov, D. ;
Palanisamy, T. ;
El-Raghy, T. ;
Barsoum, M. W. .
WEAR, 2007, 262 (11-12) :1479-1489
[22]   Stoichiometry dependence of hardness, elastic properties, and oxidation resistance in TiN/SiNx nanocomposites deposited by a hybrid process [J].
Haug, FJ ;
Schwaller, P ;
Wloka, J ;
Patscheider, J ;
Karimi, A ;
Tobler, M .
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, 2004, 22 (04) :1229-1234
[23]   APPLICATIONS OF SOLID LUBRICANT FILMS IN SPACECRAFT [J].
HILTON, MR ;
FLEISCHAUER, PD .
SURFACE & COATINGS TECHNOLOGY, 1992, 55 (1-3) :435-441
[24]  
HOLMBERG K, 1993, TRIBOLOGY S, V25, P399, DOI 10.1016/S0167-8922(08)70395-X
[25]   Tribology of thin coatings [J].
Holmberg, K ;
Ronkainen, H ;
Matthews, A .
CERAMICS INTERNATIONAL, 2000, 26 (07) :787-795
[26]   Silver diffusion and high-temperature lubrication mechanisms of YSZ-Ag-Mo based nanocomposite coatings [J].
Hu, J. J. ;
Muratore, C. ;
Voevodin, A. A. .
COMPOSITES SCIENCE AND TECHNOLOGY, 2007, 67 (3-4) :336-347
[27]  
Hutchings I, 2017, TRIBOLOGY: FRICTION AND WEAR OF ENGINEERING MATERIALS, 2ND EDITION, P37, DOI 10.1016/B978-0-08-100910-9.00003-9
[28]   Architecture of PVD coatings for metalcutting applications: A review [J].
Inspektor, Abaron ;
Salvador, Paul A. .
SURFACE & COATINGS TECHNOLOGY, 2014, 257 :138-153
[29]   Tribological properties of TiN/Ag nanocomposite coatings [J].
Koestenbauer, Harald ;
Fontalvo, Gerardo A. ;
Mitterer, Christian ;
Keckes, Jozef .
TRIBOLOGY LETTERS, 2008, 30 (01) :53-60
[30]   High-temperature tribological behavior of Cr′N-Ag self-lubricating coatings [J].
Kutschej, Kerstin ;
Mitterer, Christian ;
Mulligan, Christopher P. ;
Gall, Daniel .
ADVANCED ENGINEERING MATERIALS, 2006, 8 (11) :1125-1129
123456