Bonding Wire Fatigue Life Prediction of Power Module in Thermal Cycling Test

被引：0
|
作者：
Guo, Yuanqi [1 ]
Xu, Yangjian [1 ]
Liang, Lihua [1 ]
Liu, Yong [2 ]
机构：
[1] Zhejiang Univ Technol, Coll Mech Engn, Hangzhou, Zhejiang, Peoples R China
[2] Fairchild Semicond, Portland, ME USA
来源：
2016 17TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT) | 2016年
关键词：
wire bonding; thermal cycling test; finite element simulation;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
In this paper, 3-D finite element (FE) models were established to investigate the fatigue lives of bonding wire in different power packages in thermal cycling test. Meanwhile, three types of packages were tested. Bonding wire lift-off and neck failures took place during test, which were caused by the coefficient of thermal expansion (CTE) mismatch between wire and chip. Finally, a strain-based life prediction relation for thermal cycling test was proposed by combining the experiment results with simulation data.
引用
收藏
页码：482 / 485
页数：4
相关论文
共 17 条
  • [1] Numerical simulation of the wire bonding reliability of IGBT module under power cycling
    Bie Xiaorui
    Qin Fei
    An Tong
    Zhao Jingyi
    Fang Chao
    2017 18TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2017, : 1396 - 1401
  • [2] Thermal Cycling Test and Life Prediction of Aviation Electrical Connectors
    Luo Y.
    Ma X.
    Li X.
    Wang Z.
    2018, Chinese Mechanical Engineering Society (29): : 333 - 339
  • [3] Thermal fatigue life prediction and intermetallic compound behaviour of SAC305 BGA solder joints subject to accelerated thermal cycling test
    Apalowo, Rilwan Kayode
    Abas, Mohamad Aizat
    Ani, Fakhrozi Che
    Mukhtar, Abdul Fatah Muhamed
    Ramli, Mohamad Riduwan
    SOLDERING & SURFACE MOUNT TECHNOLOGY, 2024, 36 (03) : 154 - 164
  • [4] Higher Thermal Cycling Reliability of Power Semiconductor Module for Power Converters
    Morozumi, Akira
    Hokazono, H.
    Nishimura, Yoshitaka
    Kariya, Yoshiharu
    Mochizuki, Eiji
    Takahashi, Yoshikazu
    2016 International Conference on Electronics Packaging (ICEP), 2016, : 405 - 410
  • [5] The degradation investigation of Al wire bonding strength in power device under thermal shock test
    Fei, Jingming
    Ren, Ping
    Wang, Ningning
    Zhang, Binbin
    2017 18TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2017, : 1179 - 1183
  • [6] Transient Thermal Analysis of High-Concentration Photovoltaic Cell Module Subjected to Coupled Thermal and Power Cycling Test Conditions
    Wang, Ning-Yuan
    Chiang, Shih-Ying
    Chou, Tsung-Lin
    Shih, Zun-Hao
    Hong, Hwen-Fen
    Chiang, Kuo-Ning
    2010 12TH IEEE INTERSOCIETY CONFERENCE ON THERMAL AND THERMOMECHANICAL PHENOMENA IN ELECTRONIC SYSTEMS, 2010,
  • [7] Resonant fatigue test performance of battery pack connections using wire bonding
    Wei, Xing
    Takahashi, Junko
    Tatsumi, Kohei
    MICROELECTRONICS RELIABILITY, 2025, 168
  • [8] Porosity effect on fatigue life of sintered silver during thermal cycling
    Yu, Haotian
    Qin, Fei
    Dai, Yanwei
    2022 23RD INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY, ICEPT, 2022,
  • [9] Comparison of Thermal Stress Concentration and Profile between Power Cycling Test and Thermal Cycling Test for Power Device Heat Dissipation Structures using Ag Sintering Chip-attachment
    Osonoe, Kensuke
    Asai, Takahiro
    Aoki, Masaaki
    Kida, Hitoshi
    Nakano, Nobuhiko
    2016 International Conference on Electronics Packaging (ICEP), 2016, : 631 - 634
  • [10] Finite Element Simulation and Power Cycling Failure Analysis of IGBT Device Wire Bonding Joints<bold> </bold>
    Feng, Jiayun
    Wu, Rui
    Cao, Yongfeng
    Li, Jiaqi
    Wang, Runze
    Jin, Shuai
    Wang, Yiping
    Tian, Yanhong
    2024 25TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY, ICEPT, 2024,
12