Investigation on the Wettability between Nb-Al Alloy and Porous Al2O3 Ceramics Prepared by Freeze Casting

被引：2
作者：
Chen Huanming [1 ]
Luo Min [2 ]
Li Xin [1 ]
Lin Xinxin [1 ]
Yang Dong [1 ]
机构：
[1] Ningxia Univ, Sch Phys & Elect Informat, Yinchuan 750021, Peoples R China
[2] Ningxia Univ, Sch Chem & Chem Engn, Yinchuan 750021, Peoples R China
来源：
MATERIALS AND MANUFACTURING, PTS 1 AND 2 | 2011年 / 299-300卷
基金：
中国国家自然科学基金;
关键词：
Wettability; Porous Al2O3 ceramics; Nb-Al alloy; Pressureless infiltration; ALUMINIDE-BASED COMPOSITES; NIOBIUM ALUMINIDES; MICROSTRUCTURE; SILICA;
D O I：
10.4028/www.scientific.net/AMR.299-300.687
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper adopted freeze casting method to prepare porous Al2O3 ceramic bodies with interconnected pore channels as a preform. The preform was pressureless infiltrated with Nb-Al binary alloy by using electromagnetic induction furnace. The results indicated that the Nb-Al melt solidified as a sphere-like body under the surface tension driving. It was difficult to obtain Nb-Al binary alloy matrix Al2O3 ceramic composites. However, the wettability between Nb-Al melt and porous Al2O3 ceramic bodies was improved obviously while the Ti and Cr alloying elements were added into Nb-Al binary alloy. Also, the resultant Nb-35Ti-20Al-10Cr melt was tilled into the interconnected pore channels existed in the Al2O3 preform by pressureless infiltration.
引用
收藏
页码：687 / +
页数：2
相关论文
共 50 条
  • [41] Hierarchically porous Al2TiO5 ceramics via freeze-gel casting
    Li, Lan
    Li, Xin
    Liu, Xiner
    Dong, Xue
    Zhang, Qiang
    Yan, Liwen
    Liu, Jiachen
    Guo, Anran
    CERAMICS INTERNATIONAL, 2022, 48 (15) : 22343 - 22351
  • [42] Characterization of Ni coating layer of Al2O3 particles and their wettability behavior in Al2O3@Ni/Al-10Si composites
    Sun, Pengfei
    Dong, Zhou
    Chen, Yang
    Yan, Hong
    Luo, Chao
    Song, Honggun
    Hu, Zhi
    APPLIED SURFACE SCIENCE, 2020, 526
  • [43] Utilization of Al scrap for fabrication of Al(alloy)/Al2O3 composite material
    Yoshikawa, N
    Yamaguchi, H
    Kitahara, G
    Taniguchi, S
    MATERIALS TRANSACTIONS, 2003, 44 (07) : 1271 - 1275
  • [44] Effect of Al2O3 particles on the microstructure and sliding wear of 7075 Al alloy manufactured by squeeze casting method
    Daoud, A
    Abou El-Khair, MT
    Abdel-Azim, A
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2004, 13 (02) : 135 - 143
  • [45] Effect of Al2O3 particles on the microstructure and sliding wear of 7075 Al alloy manufactured by squeeze casting method
    A. Daoud
    M. T. Abou El-Khair
    A. N. Abdel-Azim
    Journal of Materials Engineering and Performance, 2004, 13 : 135 - 143
  • [46] Reaction Mechanisms in Al2O3/CuO Infiltration by Liquid Al
    Guedes, M.
    Ferreira, J. M. F.
    Ferro, A. C.
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2012, 95 (10) : 3064 - 3070
  • [47] Sintering behaviour and microstructures of Ti(Al,O)/Al2O3, Ti3Al(O)/Al2O3 and TiAl(O)/Al2O3 in situ composites
    Cai, ZH
    Zhang, DL
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 419 (1-2): : 310 - 317
  • [48] Synthesis of γ-Al2O3 nanopowders by freeze-drying
    Tallon, Carolina
    Moreno, Rodrigo
    Nieto, Ma Isabel
    MATERIALS RESEARCH BULLETIN, 2006, 41 (08) : 1520 - 1529
  • [49] Influence of nano ?-Al2O3 as sintering aid on the microstructure of spray dried and sintered ?-Al2O3 ceramics
    Ramaswamy, Parvati
    Sanjai, S. Gowtham
    Ramawarrier, Reghu
    MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 902 - 907
  • [50] A Dense Cr2O3/Al2O3 Composite Ceramic Coating Prepared by Electrodeposition and Sealing with Al2O3
    Di, Jiao
    Liu, Wei
    Xue, Lihong
    Zhou, Qilai
    Yan, Youwei
    COATINGS, 2019, 9 (01):
12345