Investigation on the Wettability between Nb-Al Alloy and Porous Al2O3 Ceramics Prepared by Freeze Casting

被引：2
|
作者：
Chen Huanming [1 ]
Luo Min [2 ]
Li Xin [1 ]
Lin Xinxin [1 ]
Yang Dong [1 ]
机构：
[1] Ningxia Univ, Sch Phys & Elect Informat, Yinchuan 750021, Peoples R China
[2] Ningxia Univ, Sch Chem & Chem Engn, Yinchuan 750021, Peoples R China
来源：
MATERIALS AND MANUFACTURING, PTS 1 AND 2 | 2011年 / 299-300卷
基金：
中国国家自然科学基金;
关键词：
Wettability; Porous Al2O3 ceramics; Nb-Al alloy; Pressureless infiltration; ALUMINIDE-BASED COMPOSITES; NIOBIUM ALUMINIDES; MICROSTRUCTURE; SILICA;
D O I：
10.4028/www.scientific.net/AMR.299-300.687
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper adopted freeze casting method to prepare porous Al2O3 ceramic bodies with interconnected pore channels as a preform. The preform was pressureless infiltrated with Nb-Al binary alloy by using electromagnetic induction furnace. The results indicated that the Nb-Al melt solidified as a sphere-like body under the surface tension driving. It was difficult to obtain Nb-Al binary alloy matrix Al2O3 ceramic composites. However, the wettability between Nb-Al melt and porous Al2O3 ceramic bodies was improved obviously while the Ti and Cr alloying elements were added into Nb-Al binary alloy. Also, the resultant Nb-35Ti-20Al-10Cr melt was tilled into the interconnected pore channels existed in the Al2O3 preform by pressureless infiltration.
引用
收藏
页码：687 / +
页数：2
相关论文
共 50 条
  • [1] Investigation on the Freeze Casting Porous Al2O3 Ceramic Bodies Infiltrated with Nb-Ti-Al-Cr Alloy by Pressureless Infiltration
    Chen, H. M.
    Luo, M.
    Wang, H. C.
    Fu, P.
    Yang, D.
    Lin, X. X.
    Li, X.
    MECHANICAL ENGINEERING AND MATERIALS, PTS 1-3, 2012, 152-154 : 188 - +
  • [2] The controllable microstructure of porous Al2O3 ceramics prepared via a novel freeze casting route
    Jing, Li
    Zuo, Kaihui
    Zhang Fuqiang
    Chun, Xu
    Fu Yuanfei
    Jiang, Dongliang
    Zeng, Yu-Ping
    CERAMICS INTERNATIONAL, 2010, 36 (08) : 2499 - 2503
  • [3] Fully interconnected porous Al2O3 scaffolds prepared by a fast cooling freeze casting method
    Liu, Xiaoguang
    Xue, Wendong
    Shi, Cunlan
    Sun, Jialin
    CERAMICS INTERNATIONAL, 2015, 41 (09) : 11922 - 11926
  • [4] Preparation of porous Al2O3 ceramics by starch consolidation casting method
    Chen, Zhiwei
    Xu, Guogang
    Cui, Hongzhi
    Zhang, Xueying
    Zhan, Xiaoyuan
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2018, 15 (06) : 1550 - 1558
  • [5] Direct ink writing of hierarchically porous Al2O3 matrix composites with enhanced wettability of Al
    Ling, Qi
    Yang, Li
    Tang, Shiyan
    Fan, Zitian
    Liu, Xinwang
    Jiang, Wenming
    JOURNAL OF MANUFACTURING PROCESSES, 2022, 84 : 1580 - 1588
  • [6] Freeze-casting of highly porous cellulose-nanofiber-reinforced γ-Al2O3 monoliths
    Hudelja, H.
    Konegger, T.
    Wicklein, B.
    Cretnik, J.
    Akhtar, F.
    Kocjan, A.
    OPEN CERAMICS, 2021, 5
  • [7] Freeze-cast porous Al2O3 /MgO ceramics as potential acoustic sound absorption
    Guenka, T. S. da N.
    Machado, M. R.
    Silva, A. M. A.
    Nunes, M. A. A.
    APPLIED ACOUSTICS, 2024, 220
  • [8] Gel-Casting Prepared Porous Si3N4 Ceramics with Different Contents of Y2O3 and Al2O3 Additives
    Zou, Chunrong
    Guo, Shaojun
    Zhou, Xiaosong
    Li, Song
    Yan, Chunlei
    Shen, Tongsheng
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2020, 29 (12) : 7891 - 7898
  • [9] Gel-Casting Prepared Porous Si3N4 Ceramics with Different Contents of Y2O3 and Al2O3 Additives
    Chunrong Zou
    Shaojun Guo
    Xiaosong Zhou
    Song Li
    Chunlei Yan
    Tongsheng Shen
    Journal of Materials Engineering and Performance, 2020, 29 : 7891 - 7898
  • [10] Translucent Al2O3 ceramics produced by an aqueous tape casting method
    Zhou, Chunlin
    Jiang, Benxue
    Fan, Jintai
    Mao, Xiaojian
    Pan, Liangjie
    Jiang, Yiguang
    Zhang, Long
    Fang, Yongzheng
    CERAMICS INTERNATIONAL, 2016, 42 (01) : 1648 - 1652
12345