Seismic design and elastic-plastic analysis of the hengda group super high-rise office buildings

被引:5
作者
Zhang, Xiaomeng [1 ]
Ren, Qingying [1 ]
Liu, Wenting [1 ]
Yang, Songlin [1 ]
Zhou, Yilun [1 ]
机构
[1] China Architecture Design & Res Grp, Beijing 100044, Peoples R China
关键词
high-rise building beyond the cold-specificatio; elastic-plastic analysis; performance-based seismic design; frame-corewall structure; seismic calculation; PERFORMANCE;
D O I
10.12989/eas.2020.19.3.175
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
The Hengda Group super high-rise building in Jinan City uses the frame-core tube structural system. With a height of 238.3 m, it is above the B-level height limit of 150 m for buildings within 7-magnitude seismic fortification zones. Therefore, it is necessary to apply performance-based seismic design to this super high-rise building. In this study, response spectrum analysis and comparative analysis of the structure are conducted using two software applications. Moreover, elastic time-history analysis, seismic analysis under an intermediate earthquake, and elastic-plastic time-history analysis under rare earthquakes are performed. Based on the analysis results, corresponding strengthening measures are implemented at weaker structural locations, such as corners, wall ends connected to framed girders, and coupling beams connected to framed girders. The failure mode and failure zone of major stress components of the structure under rare earthquakes are analysed. The conclusions to this research demonstrate that weaker locations and important parts of the structure satisfy the requirements for elastic-plastic deformation in the event of rare earthquakes.
引用
收藏
页码:175 / 188
页数:14
相关论文
共 29 条
[1]   Performance-based evaluation of tall buildings using advanced intensity measures (case study: 30-story steel structure with framed-tube system) [J].
Asgarian, B. ;
Nojoumi, R. M. ;
Alanjari, P. .
STRUCTURAL DESIGN OF TALL AND SPECIAL BUILDINGS, 2014, 23 (02) :81-93
[2]  
C.M.C, 2010, Code for seismic design of buildings (GB 50011-2010)
[3]   The impact of modelling uncertainties on the seismic performance assessment of reinforced concrete frame buildings [J].
Celarec, D. ;
Dolsek, M. .
ENGINEERING STRUCTURES, 2013, 52 :340-354
[4]   Seismic fragilities for non-ductile reinforced concrete frames - Role of aleatoric and epistemic uncertainties [J].
Celik, Ozan Cem ;
Ellingwood, Bruce R. .
STRUCTURAL SAFETY, 2010, 32 (01) :1-12
[5]   Seismic structural demands and inelastic deformation ratios: a theoretical approach [J].
Chikh, Benazouz ;
Mebarki, Ahmed ;
Laouami, Nacer ;
Leblouba, Moussa ;
Mehani, Youcef ;
Hadid, Mohamed ;
Kibboua, Abderrahmane ;
Benouar, Djilali .
EARTHQUAKES AND STRUCTURES, 2017, 12 (04) :397-407
[6]  
CMC, 2010, Code for Design of Concrete Structures (GB50010-2010)
[7]  
CMC (China Ministry of Construction), 2012, GB500092012 CMC
[8]  
CMC (China Ministry of Construction), 2010, 32010 CMC JGJ
[9]  
Esam Ali, 2018, [建筑结构, Building Structure], V48, P25
[10]   Seismic analysis of the world's tallest building [J].
Fan, Hong ;
Li, Q. S. ;
Tuan, Alex Y. ;
Xu, Lihua .
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2009, 65 (05) :1206-1215