Improved Tensile Strength of Carbon Nanotube Reinforced Aluminum Composites Processed by Powder Metallurgy

被引：9
|
作者：
Liao, Jinzhi [1 ]
Tan, Ming-Jen [1 ]
机构：
[1] Nanyang Technol Univ, Sch Mech & Aerosp Engn, Singapore 639798, Singapore
来源：
ADVANCES IN MATERIALS PROCESSING X | 2012年 / 500卷
关键词：
Aluminum; carbon nanotubes; composite; NANOCOMPOSITES; FABRICATION; MATRIX;
D O I：
10.4028/www.scientific.net/AMR.500.651
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Carbon nanotube (CNT) reinforced aluminum (Al) composites were synthesized using the powder metallurgy (P/M) technique, combined with hot extrusion and hot rolling. 0-2.0wt.% of CNTs were added as reinforcements. The effect of CNTs on the mechanical properties of Al was investigated and a significant enhancement in tensile strength was obtained compared with the pure matrix. The improved strength was analyzed based on (i) Orowan strengthening, (ii) thermal mismatch between CNTs and matrix, and (iii) load partition effect due to the CNTs.
引用
收藏
页码：651 / 656
页数：6
相关论文
共 50 条
  • [1] Tensile Strength and Electrical Conductivity of Carbon Nanotube Reinforced Aluminum Matrix Composites Fabricated by Powder Metallurgy Combined with Friction Stir Processing
    Z.Y.Liu
    B.L.Xiao
    W.G.Wang
    Z.Y.Ma
    JournalofMaterialsScience&Technology, 2014, 30 (07) : 649 - 655
  • [2] Tensile Strength and Electrical Conductivity of Carbon Nanotube Reinforced Aluminum Matrix Composites Fabricated by Powder Metallurgy Combined with Friction Stir Processing
    Liu, Z. Y.
    Xiao, B. L.
    Wang, W. G.
    Ma, Z. Y.
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2014, 30 (07) : 649 - 655
  • [3] Superplastic behavior of carbon nanotube reinforced aluminum composites fabricated by flake powder metallurgy
    Huang, Haiyue
    Fan, Genlian
    Tan, Zhanqiu
    Xiong, Ding-Bang
    Guo, Qiang
    Guo, Cuiping
    Li, Zhiqiang
    Zhang, Di
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 699 : 55 - 61
  • [4] Improved tensile strength of carbon nanotube-grafted carbon fiber reinforced composites
    Lee, Geunsung
    Sung, Minchang
    Youk, Ji Ho
    Lee, Jinyong
    Yu, Woong-Ryeol
    COMPOSITE STRUCTURES, 2019, 220 : 580 - 591
  • [5] Microstructure and mechanical properties of carbon nanotube reinforced magnesium matrix composites by powder metallurgy
    Zhang, Yunhe
    Li, Geng
    Miao, Menghe
    Li, Yuncang
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2013, 30 (SUPPL.): : 102 - 106
  • [6] Research progress in carbon nanotube reinforced copper matrix composites prepared by powder metallurgy
    Zhang, Yunna
    Jia, Lei
    Zhou, Yongxin
    Lü, Zhenlin
    Kondoh, Katsuyoshi
    Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), 2024, 55 (08): : 3165 - 3179
  • [7] INTERLAMINAR TENSILE STRENGTH OF CFRP COMPOSITES REINFORCED WITH INTERLEAVED CARBON NANOTUBE SHEETS
    Levy-Wendt, Benjamin L.
    Bever, Alaina M.
    Wright, Nicholaus C.
    Venable, Timothy J.
    Daily, John P.
    Shih, Frank J.
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2014, VOL 14, 2015,
  • [8] Review of Recent Progress in the Development and Properties of Aluminum Metal Matrix Composites Reinforced with Multiwalled Carbon Nanotube by Powder Metallurgy Route
    Thomas, Shijo
    Umasankar, V
    MATERIALS PERFORMANCE AND CHARACTERIZATION, 2019, 8 (03) : 371 - 400
  • [9] In-situ carbon nanotube-covered silicon carbide particle reinforced aluminum matrix composites fabricated by powder metallurgy
    Li, Shisheng
    Su, Yishi
    Ouyang, Qiubao
    Zhang, Di
    MATERIALS LETTERS, 2016, 167 : 118 - 121
  • [10] Carbon Nanotube Reinforced Titanium Metal Matrix Composites Prepared by Powder Metallurgy-A Review
    Munir, Khurram S.
    Kingshott, Peter
    Wen, Cuie
    CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES, 2015, 40 (01) : 38 - 55
12345