Polycrystalline silicon films prepared by metal- induced crystallisation using pre- and post-deposited aluminium on amorphous silicon

We report on the successful fabrication of polycrystalline silicon films by aluminium-induced crystallisation (AIC) of Radio frequency (rf) plasma-enhanced chemical vapour deposited (PECVD) a-Si films. The effects of annealing at different temperatures (300 and 400 degrees C), below the eutectic temperature of the Si-Al binary system, on the crystallisation process have been studied. This work emphasises the important role of the position of the Al layer with respect to the Si layer on the crystallisation process. The properties of the crystallised films were characterised using X-ray diffraction, Raman spectroscopy, ellipsometry, field-emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM). With an increase in the annealing temperature, it was found that the degree of crystallisation of annealed a-Si/Al and Al/a-Si films increased. The results showed that the arrangement where the Al was on top of the a-Si had a more prominent effect on crystallisation enhancement than when Al was below the a-Si. The interfacial layer between the Al and a-Si film is crucial because it influences the layer-exchange process during annealing. The oxide layer formed between the Al and the a-Si layers greatly retards the crystallisation process in the case of the Al/Si arrangement. Our investigations suggest that polycrystalline Si films formed by AIC can be used as a seed layer in solar cell fabrication.