Investigation of crack initiation and propagation behavior of AISI 310 stainless steel up to very high cycle fatigue

被引：14

作者：

Khan, M. K. ^{[1
]}

Wang, Q. Y. ^{[1
]}

机构：

[1] Sichuan Univ, Dept Mech & Engn Sci, Chengdu 610065, Peoples R China

来源：

INTERNATIONAL JOURNAL OF FATIGUE | 2013年 / 54卷

基金：

中国国家自然科学基金;

关键词：

Very high cycle fatigue; Surface roughness; PSBs; Local plasticity; Crack initiation; GIGACYCLE FATIGUE; SURFACE-RELIEF; BEARING STEEL; MECHANISM; IRON; AFM;

D O I：

10.1016/j.ijfatigue.2013.04.009

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Fatigue behavior up to very high cycles for AISI 310 stainless steel has been investigated. The fatigue crack initiated from the surface of the material. It was found that up to 10(6) cycles, cracks initiated from the carbide precipitates at grain boundaries. However, above 10(6) cycles, the cracks initiated from persistent slip bands found at the surface of the specimen. At lower stress levels, slip bands were developed without initiating the cracks. The horizontal asymptote S-N curve from 10(6) to 10(9) cycles was attributed to the development of slip bands all over the surface of the specimen, before crack initiation. (C) 2013 Elsevier Ltd. All rights reserved.

引用

页码：38 / 46

页数：9

共 50 条

[21] Significance of crystallographic misorientation at phase boundaries for fatigue crack initiation in a duplex stainless steel during high and very high cycle fatigue loading
Doenges, B.
Giertler, A.
Krupp, U.
Fritzen, C. -P.
Christ, H. -J.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 589 : 146 - 152
[22] Effect of aging time on crack initiation mechanism of precipitation hardening stainless steel in very high cycle fatigue regime
Zheng, Ying
Sun, Huili
Yan, Luchun
Pang, Xiaolu
Gao, Kewei
INTERNATIONAL JOURNAL OF FATIGUE, 2023, 170
[23] Experimental investigation of Very-High-Cycle Fatigue behavior for a structural steel
Qian, G. A.
Hong, Y. S.
ADVANCES IN HETEROGENEOUS MATERIAL MECHANICS 2008, 2008, : 1199 - 1202
[24] Crack growth rates and microstructure feature of initiation region for very-high-cycle fatigue of a high-strength steel
Hu, Yuanpei
Sun, Chengqi
Hong, Youshi
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2018, 41 (08) : 1717 - 1732
[25] Microstructure evolution and very-high-cycle fatigue crack initiation behavior of a structural steel with two loading intermittence modes
Zhou, Yadong
Sun, Jingyu
Pan, Xiangnan
Qian, Guian
Hong, Youshi
INTERNATIONAL JOURNAL OF FATIGUE, 2022, 161
[26] The Significance of Crack Initiation Stage in Very High Cycle Fatigue of Steels
Kazymyrovych, V.
Bergstrom, J.
Burman, C.
STEEL RESEARCH INTERNATIONAL, 2010, 81 (04) : 308 - 314
[27] Crack initiation and short crack growth in metastable austenitic stainless steel in the high cycle fatigue regime
Roth, I.
Kuebbeler, M.
Krupp, U.
Christ, H. -J.
Fritzen, C. -P.
FATIGUE 2010, 2010, 2 (01): : 941 - 948
[28] Microstructure evolution and crack initiation behavior of Q450NQR1 high-strength weathering steel in very high cycle fatigue regime
Huang, Wentao
Peng, Haotian
Liu, Yongjie
Chen, Yao
Wu, Yiru
Liu, Fulin
Cong, Tao
Wang, Qingyuan
INTERNATIONAL JOURNAL OF FATIGUE, 2024, 185
[29] A probabilistic model on crack initiation modes of metallic materials in very high cycle fatigue
Nakagawa, Akiyoshi
Sakai, Tatsuo
Harlow, D. Gary
Oguma, Noriyasu
Nakamura, Yuki
Ueno, Akira
Kikuchi, Shoichi
Sakaida, Akiyoshi
21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21), 2016, 2 : 1199 - 1206
[30] Crack initiation in the very high cycle fatigue regime of nitrided 42CrMo4 steel
Weidner, Anja
Lippmann, Tim
Biermann, Horst
JOURNAL OF MATERIALS RESEARCH, 2017, 32 (23) : 4305 - 4316

← 1 2 3 4 5 →