Complex Modulus and Fatigue Analysis of Asphalt Mix after Daily Rapid Freeze-Thaw Cycles

被引:54
作者
Badeli, Saeed [1 ]
Carter, Alan [1 ]
Dore, Guy [2 ]
机构
[1] Ecole Technol Super, Dept Construct Engn, 1100 Rue Notre Dame, Montreal, PQ H3C 1K3, Canada
[2] Univ Laval, Dept Genie Civil, 1065 Ave Med, Laval, PQ G1V 0A6, Canada
基金
加拿大自然科学与工程研究理事会;
关键词
Asphalt mixture; Freeze-thaw cycles; Complex modulus; Fatigue; AIR VOID DISTRIBUTION; PAVEMENT; PERFORMANCE;
D O I
10.1061/(ASCE)MT.1943-5533.0002236
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Quebec roads are subjected to seasonal ambient temperature variations and daily rapid variations of temperature. These significant temperature variations in combination with the moisture inside the pores result in the development of premature deterioration in asphalt pavement. At present, the effect of regional freeze-thaw cycles on fatigue cracking has not been considered in the Mechanistic-empirical pavement design guide method or other design methods in cold regions, whose results overestimate the pavement life. Hence, the main objective of this study was to conduct the thermomechanical tests on an asphalt mixture before and after rapid freeze-thaw cycles. Considering the differences regarding the 2S2P1D model parameters, it was found that the influence of freeze-thaw conditions on the stiffness behavior of the mix is higher when increasing the number of cycles from 150 to 300. Regarding fatigue test results, the reference mixture was more resistant to fatigue cracking than the conditioned mix after 300 freeze-thaw cycles.
引用
收藏
页数:13
相关论文
共 48 条
[1]  
[Anonymous], 2008, ASTMC666
[2]  
[Anonymous], 2003, ROAD MATER PAVEMENT
[3]   Influence of air void distribution on the moisture susceptibility of asphalt mixes [J].
Arambula, Edith ;
Masad, Eyad ;
Martin, Amy Epps .
JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2007, 19 (08) :655-664
[4]   Effect of binder characteristics on fatigue of asphalt pavement using an intrinsic damage approach [J].
Baaj, H ;
Di Benedetto, H ;
Chaverot, P .
ROAD MATERIALS AND PAVEMENT DESIGN, 2005, 6 (02) :147-174
[5]  
Baaj H., 2002, THESIS
[6]  
Badeli S., 2016, 61 ANN C CAN TECHN A, V61, P57
[7]  
Badeli S., 2017, COLD REG SCI TECHNOL, V146, P98, DOI [10. 1016/j. coldregions. 2017. 12. 001, DOI 10.1016/J.C0LDREGI0NS.2017.12.001]
[8]  
Bagampadde U., 2004, Road Material andPavement Design, V5, P7, DOI [10.1080/14680629.2004.9689961, DOI 10.1080/14680629.2004.9689961]
[9]   Transitioning from AASHTO T283 to the Simple Performance Test Using Moisture Conditioning [J].
Bausano, Jason ;
Williams, R. Christopher .
JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2009, 21 (02) :73-82
[10]   Field monitoring and comparison of thermal- and load-induced strains in asphalt pavement [J].
Bayat, A. ;
Knight, M. A. ;
Soleymani, Hamid R. .
INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 2012, 13 (06) :508-514