Influence of cold rolling and ageing treatment on microstructure and mechanical properties of Ti-30Nb-5Ta-6Zr alloy

被引:29
作者
Wang, Yu [1 ]
Zhao, Juan [1 ]
Dai, Shijuan [1 ]
Chen, Feng [1 ]
Yu, Xinquan [1 ]
Zhang, Youfa [1 ]
机构
[1] Southeast Univ, Sch Mat Sci & Engn, Jiangsu Key Lab Adv Metall Mat, Nanjing 211189, Jiangsu, Peoples R China
关键词
Ti-30Nb-5Ta-6Zr; Cold rolling; Ageing; Microstructure; Mechanical properties; DEFORMATION-BEHAVIOR; PHASE-STABILITY; TITANIUM; TEXTURE; STRAIN;
D O I
10.1016/j.jmbbm.2013.06.006
中图分类号
R318 [生物医学工程];
学科分类号
0831 ;
摘要
In this study, the relationship between deformation mechanism and rolling reductions was investigated, and the effects of deformation reductions on the microstructure and mechanical properties of the alloys both cold rolled and aged were revealed: It was found that the equiaxed beta grains of the Ti-30Nb-5Ta-6Zr alloy have elongated gradually with increasing the deformation reduction. The deformation mechanism of dislocation slipping, deformed twins and SIM alpha '' phase appeared in the alloy deformed by 23% and 66%. The type of twins of the alloy deformed by 23% and 66% are {112}< 111 > and {332}< 113 > respectively. When the reduction was up to 85%, dislocation slipping was the main mode of deformation accompanying with SIM alpha '' phase occurred. With increasing deformation reduction, the average size of lenticular precipitation a phase decreased gradually. The strength of cold rolled and aged samples increased with increasing deformation reduction, while elastic modulus decreased. Due to the precipitation a phase, the elastic modulus of aged samples was higher than cold rolled. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码:33 / 42
页数:10
相关论文
共 21 条
[1]   Size-strain study of NiO nanoparticles by X-ray powder diffraction line broadening [J].
Goncalves, N. S. ;
Carvalho, J. A. ;
Lima, Z. M. ;
Sasaki, J. M. .
MATERIALS LETTERS, 2012, 72 :36-38
[2]   CORRELATION OF TENSILE PROPERTIES, DEFORMATION MODES, AND PHASE-STABILITY IN COMMERCIAL BETA-PHASE TITANIUM-ALLOYS [J].
HANADA, S ;
IZUMI, O .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1987, 18 (02) :265-271
[3]   Young's modulus and mechanical properties of Ti-29Nb-13Ta-4.6Zr in relation to α" martensite [J].
Hao, YL ;
Niinomi, M ;
Kuroda, D ;
Fukunaga, K ;
Zhou, YL ;
Yang, R ;
Suzuki, A .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2002, 33 (10) :3137-3144
[4]   Phase-stability dependence of plastic deformation behavior in Ti-Nb-Ta-Zr-O alloys [J].
Hwang, J ;
Kuramoto, S ;
Furuta, T ;
Nishino, K ;
Saito, T .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2005, 14 (06) :747-754
[5]   Relationship between texture and macroscopic transformation strain in severely cold-rolled Ti-Nb-Al superelastic alloy [J].
Inamura, T ;
Fukui, Y ;
Hosoda, H ;
Wakashima, K ;
Miyazaki, S .
MATERIALS TRANSACTIONS, 2004, 45 (04) :1083-1089
[6]  
Kenneth E., 2009, Phase Transformations in Metals and Alloys, Vthird
[7]  
Kent D., 2010, MAT SCI ENG A-STRUCT, P2246
[8]   Strength enhancement of a biomedical titanium alloy through a modified accumulative roll bonding technique [J].
Kent, Damon ;
Wang, Gui ;
Yu, Zhentao ;
Ma, Xiqun ;
Dargusch, Matthew .
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2011, 4 (03) :405-416
[9]   Texture and shape memory behavior of Ti-22Nb-6Ta alloy [J].
Kim, HY ;
Sasaki, T ;
Okutsu, K ;
Kim, JI ;
Inamura, T ;
Hosoda, H ;
Miyazaki, S .
ACTA MATERIALIA, 2006, 54 (02) :423-433
[10]   Design and mechanical properties of new β type titanium alloys for implant materials [J].
Kuroda, D ;
Niinomi, M ;
Morinaga, M ;
Kato, Y ;
Yashiro, T .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 243 (1-2) :244-249