Wear of CBN tools in ultra-precision machining of STAVAX

被引：13

作者：

Ding, X ^{[1
]}

Liew, WYH ^{[1
]}

Ngoi, BKA ^{[1
]}

Gan, JGK ^{[1
]}

Yeo, SH ^{[1
]}

机构：

[1] Nanyang Technol Univ, Sch Mech & Prod Engn, Singapore 639798, Singapore

来源：

TRIBOLOGY LETTERS | 2002年 / 12卷 / 01期

关键词：

CBN tools; machining; STAVAX; wear;

D O I：

10.1023/A:1013987708701

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

CBN cutting tools are widely used in ultra-precision machining of STAVAX (specialized stainless steel) mould inserts for injection moulding of optical lenses. This paper will report on experiments carried out to investigate the wear of CBN tools with different grain sizes and various CBN/TiN ratios in ultra-precision machining of STAVAX. The tool-wear characteristics were observed to be greatly dependent on the tool type, hardness of the STAVAX and cutting parameters used. In the machining of STAVAX with a hardness of 55 HRC, fine-scale cavities were formed on the rake face and as such the surface damage acted like a chip breaker resulting in formation of cracks. While the flank faces of all tool types showed a similar wear resistance, it was observed that a combination of a higher percentage of TiN binder and smaller grain size led to greater wear resistance on the rake face. It was found that the formation of cracks on the rake faces could be prevented by means of either increasing the cutting speed or reducing the hardness of the machined workpiece.

引用

页码：3 / 12

页数：10

共 19 条

[1]

[Anonymous], Structures, V122, DOI [10.1016/j, DOI 10.1016/J]

[2] Cutting tool wear in the machining of hardened steels Part II: cubic boron nitride cutting tool wear [J].

Barry, J ;

Byrne, G .

WEAR, 2001, 247 (02) :152-160

[3]

BHATTACHARYYA SK, 1988, MACHINING HARD MAT, P95

[4] Cubic boron nitride tool wear in interrupted hard cutting [J].

Chou, YK ;

Evans, CJ .

WEAR, 1999, 225 :234-245

[5] Tool wear mechanism in continuous cutting of hardened tool steels [J].

Chou, YK ;

Evans, CJ .

WEAR, 1997, 212 (01) :59-65

[6]

Hooper RM, 1989, IND DIAMOND REV, V89, P170

[7] ON THE WEAR MECHANISM OF CUBIC BORON-NITRIDE BASE CUTTING TOOLS [J].

KLIMENKO, SA ;

MUKOVOZ, YA ;

LYASHKO, VA ;

VASHCHENKO, AN ;

OGORODNIK, VV .

WEAR, 1992, 157 (01) :1-7

[8] WEAR MECHANISMS OF ULTRAHARD, NONMETALLIC CUTTING MATERIALS [J].

KONIG, W ;

NEISES, A .

WEAR, 1993, 162 :12-21

[9]

KONIG W, 1990, IND DIAMOND REV, V2, P79

[10] A STUDY OF CUTTING WITH A CBN TOOL [J].

LIN, ZC ;

CHEN, DY .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1995, 49 (1-2) :149-164

← 1 2 →