Comparison between microwave and conventional sintering on the properties and microstructural evolution of tetragonal zirconia

被引：65

作者：

Ramesh, S. ^{[1
,3
]}

Zulkifli, N. ^{[1
]}

Tan, C. Y. ^{[1
]}

Wong, Y. H. ^{[1
]}

Tarlochan, F. ^{[2
]}

Ramesh, S. ^{[1
,3
]}

Teng, W. D. ^{[4
]}

Sopyan, I. ^{[5
]}

Bang, L. T. ^{[6
]}

Sarhan, Ahmed A. D. ^{[7
]}

机构：

[1] Univ Malaya, Ctr Adv Mfg & Mat Proc, Dept Mech Engn, Fac Engn, Kuala Lumpur 50603, Malaysia

[2] Qatar Univ, Mech & Ind Engn Dept, Coll Engn, Doha, Qatar

[3] Univ Malaya, Dept Phys, Ctr Ion, Fac Sci, Kuala Lumpur 50603, Malaysia

[4] SIRIM Berhad, Ceram Technol Grp, Shah Alam 40911, Malaysia

[5] Int Islamic Univ Malaysia, Dept Mfg & Mat Engn, Kuala Lumpur 50728, Malaysia

[6] Kyushu Univ, Fac Dent Sci, Dept Biomat, Fukuoka, Japan

[7] King Fahd Univ Petr & Minerals, Dept Mech Engn, Dhahran 31261, Saudi Arabia

来源：

CERAMICS INTERNATIONAL | 2018年 / 44卷 / 08期

关键词：

Microwave sintering; Conventional sintering; Y-TZP; Mechanical properties; Microstructure evolution; LOW-TEMPERATURE DEGRADATION; YTTRIA-STABILIZED ZIRCONIA; MECHANICAL-PROPERTIES; ENVIRONMENTAL DEGRADATION; GRAIN-GROWTH; OXIDE; DENSIFICATION; ELECTROLYTE; ALUMINA; SIZE;

D O I：

10.1016/j.ceramint.2018.02.086

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

In this research, the comparison between microwave sintering and conventional sintering on the mechanical properties and microstructural evolution of 3 mol% yttria-stabilised zirconia were studied. Green bodies were compacted and sintered at various temperatures ranging from 1200 degrees C to 1500 degrees C. The results showed that microwave assisted sintering was beneficial in enhancing the densification and mechanical properties of zirconia, particularly when sintered at 1200 degrees C. It was revealed that as the sintering temperature was increased to 1400 degrees C and beyond, the grain size and mechanical properties for both microwave- and conventional-sintered ceramics were comparable thus suggesting that the sintering temperature where densification mechanism was activated, grain size was strongly influenced by the sintering temperature and not the sintering mode.

引用

页码：8922 / 8927

页数：6

共 39 条

[1]

Agrawal D, 2010, WOODHEAD PUBL MATER, P222

[2] Microwave processing of ceramics [J].

Agrawal, DK .

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE, 1998, 3 (05) :480-485

[3] APPLYING MICROWAVE TECHNOLOGY TO SINTERING DENTAL ZIRCONIA [J].

Almazdi, Abdulredha A. ;

Khajah, Hasan M. ;

Monaco, Edward A., Jr. ;

Kim, Hyeongil .

JOURNAL OF PROSTHETIC DENTISTRY, 2012, 108 (05) :304-309

[4] Mechanical properties and microstructural evolution of alumina zirconia nanocompo sites by microwave sintering [J].

Benavente, R. ;

Salvador, M. D. ;

Penaranda-Foix, F. L. ;

Pallone, E. ;

Borrell, A. .

CERAMICS INTERNATIONAL, 2014, 40 (07) :11291-11297

[5] A review on the susceptor assisted microwave processing of materials [J].

Bhattacharya, Madhuchhanda ;

Basak, Tanmay .

ENERGY, 2016, 97 :306-338

[6] Microwave Sintering of Zirconia Materials: Mechanical and Microstructural Properties [J].

Borrell, Amparo ;

Salvador, Maria D. ;

Penaranda-Foix, Felipe L. ;

Catala-Civera, Jose M. .

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2013, 10 (02) :313-320

[7] Impedance spectroscopy of CuO-doped Y-TZP ceramics [J].

Bowen, C ;

Ramesh, S ;

Gill, C ;

Lawson, S .

JOURNAL OF MATERIALS SCIENCE, 1998, 33 (21) :5103-5110

[8] Densification and microstructure evolution of Y-Tetragonal Zirconia Polycrystal powder during direct and hybrid microwave sintering in a single-mode cavity [J].

Charmond, Sylvain ;

Carry, Claude Paul ;

Bouvard, Didier .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2010, 30 (06) :1211-1221

[9] Ceramics for medical applications: A picture for the next 20 years [J].

Chevalier, J. ;

Gremillard, L. .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2009, 29 (07) :1245-1255

[10] Low-temperature degradation of Zirconia and implications for biomedical implants [J].

Chevalier, Jerome ;

Gremillard, Laurent ;

Deville, Sylvain .

ANNUAL REVIEW OF MATERIALS RESEARCH, 2007, 37 (1-32) :1-32

← 1 2 3 4 →