Experimental investigation of unsteady flow phenomena in a centrifugal compressor vaned diffuser of variable geometry

被引:23
作者
Justen, F [1 ]
Ziegler, KU [1 ]
Gallus, HE [1 ]
机构
[1] Rhein Westfal TH Aachen, Inst Strahlantriebe & Turboarbeitsmaschinen, D-52056 Aachen, Germany
来源
JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME | 1999年 / 121卷 / 04期
关键词
D O I
10.1115/1.2836730
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The behavior of vaned radial diffusers is generally considered to be due to the flow phenomena in the vaneless and rite semi-vaned space in the diffuser infer region. Even considering unsteady aspects, the adjacent diffuser channel is regarded as less important. The flat wedge vaned diffuser of the centrifugal compressor stage investigated allows an independent continuous adjustment of the diffuser vane angle and the radial gap between,een impeller outlet and diffuser vane inlet, so that information about the importance of these geometric parameters can be obtained The time-dependent pressure distribution on the diffuser front wall and on the suction and pressure surfaces of the diffuser vanes reveal that in the semi-vaned space mainly the region near the vane suction side is influenced by the unsteady, impeller-diffuser interaction. Downstream in the diffuser channel the unsteadiness does nor decay. Here, pressure fluctuations are appearing that are distinctly higher than the pressure fluctuations in the vaneless space. An estimation of the influence of the unsteadiness on the operating performance of the centrifugal compressor stage is made by measurements at choke and surge limit for different diffuser geometries.
引用
收藏
页码:763 / 771
页数:9
相关论文
共 21 条
[1]   EXPERIMENTAL INVESTIGATION OF ROTOR-STATOR INTERACTION IN A CENTRIFUGAL PUMP WITH SEVERAL VANED DIFFUSERS [J].
ARNDT, N ;
ACOSTA, AJ ;
BRENNEN, CE ;
CAUGHEY, TK .
JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 1990, 112 (01) :98-108
[2]  
DEAN RC, 1960, ASME, V82
[3]  
ECKARDT D, 1975, ASME, V97
[4]  
ECKARDT D, 1973, THESIS RWTH AACHEN
[5]  
ELDER RL, 1985, ASME, V107, P499
[6]  
FISHER E, 1981, J MECH ENG, V23
[7]  
HASS U, 1977, KONSTRUKTION, V29
[8]  
Jansen W., 1980, AGARD C P
[9]  
JAPIKSE D, 1987, VKI LECT SERIES
[10]  
JOHNSTON J, 1966, ASME, V82