A review on high power SOFC electrolyte layer manufacturing using thermal spray and physical vapour deposition technologies

被引:20
作者
Coddet, Pierre [1 ]
Liao, Han-lin [1 ]
Coddet, Christian [1 ]
机构
[1] IRTES LERMPS UTBM, Site Sevenans, F-90010 Belfort, France
关键词
Solid oxide fuel cell (SOFC); Solid electrolytes; Thermal spray (TS); Physical vapour deposition (PVD); OXIDE FUEL-CELLS; YTTRIA-STABILIZED ZIRCONIA; THIN-FILMS; ELECTRICAL-PROPERTIES; PLASMA SPRAY; COATINGS; COMPONENTS; DENSIFICATION; PERFORMANCE; CONDUCTIVITY;
D O I
10.1007/s40436-013-0049-7
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Manufacturing of solid oxide fuel cell (SOFC) components remains nowadays a key point for the industrial development of this technology. Especially, the deposition of the dense electrolyte layer which is sandwiched between the porous anode and the porous cathode is of paramount importance and thus focuses a lot of attention. Therefore, this paper considers and reviews recent developments concerning solid electrolyte layers manufacturing using thermal spray (TS) and physical vapour deposition (PVD) technologies.
引用
收藏
页码:212 / 221
页数:10
相关论文
共 62 条
[1]  
Aihara Y, 1995, P 4 INT C SOL OX FUE
[2]   FUNDAMENTAL OPTICAL-ABSORPTION EDGE OF SPUTTER-DEPOSITED ZIRCONIA AND YTTRIA [J].
AITA, CR ;
KWOK, CK .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1990, 73 (11) :3209-3214
[3]   Fuel cell technology: Status and future prospects [J].
Appleby, AJ .
ENERGY, 1996, 21 (7-8) :521-653
[4]   Solid oxide electrolyte fuel cell review [J].
Badwal, SPS ;
Foger, K .
CERAMICS INTERNATIONAL, 1996, 22 (03) :257-265
[5]  
Barringer EA, 1993, P 3 INT S SOL OX FUE
[6]   Thin films for micro solid oxide fuel cells [J].
Beckel, D. ;
Bieberle-Huetter, A. ;
Harvey, A. ;
Infortuna, A. ;
Muecke, U. P. ;
Prestat, M. ;
Rupp, J. L. M. ;
Gauckler, L. J. .
JOURNAL OF POWER SOURCES, 2007, 173 (01) :325-345
[7]   Mechanical and thermal transport properties of suspension thermal-sprayed alumina-zirconia composite coatings [J].
Berghaus, Joerg Oberste ;
Legoux, Jean-Gabriel ;
Moreau, Christian ;
Tarasi, Fariba ;
Chraska, Tomas .
JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2008, 17 (01) :91-104
[8]   A comparison of electrical properties of sputter-deposited electrolyte coatings dedicated to intermediate temperature solid oxide fuel cells [J].
Briois, P. ;
Billard, A. .
SURFACE & COATINGS TECHNOLOGY, 2006, 201 (3-4) :1328-1334
[9]   Structural investigations of YSZ coatings prepared by DC magnetron sputtering [J].
Briois, P. ;
Lapostolle, F. ;
Demange, V. ;
Djurado, E. ;
Billard, A. .
SURFACE & COATINGS TECHNOLOGY, 2007, 201 (12) :6012-6018
[10]  
Brousse E, 2008, THERMAL SPRAY 2008 C