IN SITU SOIL FLUSHING - STUDIES ON REMEDIATION EFFICIENCY OF POLLUTED SANDY SOILS WITH ORGANIC ACIDS

被引:17
作者
Chitimus, Alexandra-Dana [1 ]
Nedeff, Valentin [1 ]
Mosnegutu, Emilian Florin [1 ]
Panainte, Mirela [1 ]
机构
[1] Vasile Alecsandri Univ Bacau, Fac Engn, Bacau 600115, Romania
来源
ENVIRONMENTAL ENGINEERING AND MANAGEMENT JOURNAL | 2012年 / 11卷 / 12期
关键词
apparent density; efficiency; mechanical resistance; organic acid; remediation; soil flushing; HEAVY-METALS; CONTAMINATION; DECONTAMINATION; INDUSTRIAL; REDUCTION; TRANSPORT; QUALITY; IMPACT; ZINC;
D O I
10.30638/eemj.2012.269
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Techniques for the treatment of polluted soils have as main objective the destruction, elimination or immobilization of pollutants. In situ soil flushing, which is based on the extraction of contaminants from the soil with water or other proper aqueous solutions is carried out by the permeation of the extraction fluid through soil layers. In this paper, an experimental setup was exploited for soil remediation based on the principle of in situ soil flushing for ensuring a high efficiency of treatment. Correlations were identified among soil properties that influence the treatment process, structural characteristics of the installation of remediation and operating parameters. The theoretical and experimental research of the soil depollution process presented in this paper constitutes an attempt to offer, by means of detailed analysis, constructive and functional dependences, which can set the basis for the design of new depollution technologies or modernization of the older systems.
引用
收藏
页码:2163 / 2168
页数:6
相关论文
共 50 条
  • [1] Organic acids for the in situ remediation of soils polluted by heavy metals: Soil flushing in columns
    Wasay, SA
    Barrington, S
    Tokunaga, S
    WATER AIR AND SOIL POLLUTION, 2001, 127 (1-4) : 301 - 314
  • [2] Organic Acids for the In Situ Remediation of Soils Polluted by Heavy Metals: Soil Flushing in Columns
    S. A. Wasay
    S. Barrington
    S. Tokunaga
    Water, Air, and Soil Pollution, 2001, 127 : 301 - 314
  • [3] Remediation of soils polluted by heavy metals using salts of organic acids and chelating agents
    Wasay, SA
    Barrington, SF
    Tokunaga, S
    ENVIRONMENTAL TECHNOLOGY, 1998, 19 (04) : 369 - 379
  • [4] On Remediation of Heavy Metal Polluted Soils by Organic Acid
    Xu Yuping
    Li Xiangling
    Zhou Taofa
    PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ASIAN-EUROPEAN ENVIRONMENTAL TECHNOLOGY AND KNOWLEDGE TRANSFER, 2008, : 482 - 485
  • [5] Experimental Assessment of a Process for the Remediation of Organophosphorous Pesticides Contaminated Soils Through In Situ Soil Flushing and Hydrolysis
    L. Di Palma
    Water, Air, and Soil Pollution, 2003, 143 : 301 - 314
  • [6] Experimental assessment of a process for the remediation of organophosphorous pesticides contaminated soils through in situ soil flushing and hydrolysis
    Di Palma, L
    WATER AIR AND SOIL POLLUTION, 2003, 143 (1-4) : 301 - 314
  • [7] Ecotoxicological Assessment of Polluted Soils One Year after the Application of Different Soil Remediation Techniques
    Paniagua-Lopez, Mario
    Aguilar-Garrido, Antonio
    Contero-Hurtado, Jose
    Garcia-Romera, Inmaculada
    Sierra-Aragon, Manuel
    Romero-Freire, Ana
    TOXICS, 2023, 11 (04)
  • [8] In situ stabilization of chromium(VI) in polluted soils using organic ligands: The role of galacturonic, glucuronic and alginic acids
    Kantar, Cetin
    Cetin, Zeynep
    Demiray, Hilal
    JOURNAL OF HAZARDOUS MATERIALS, 2008, 159 (2-3) : 287 - 293
  • [9] Remediation of soils polluted with 2,4-D by electrokinetic soil flushing with facing rows of electrodes: A case study in a pilot plant
    Risco, C.
    Lopez-Vizcaino, R.
    Saez, C.
    Yustres, A.
    Canizares, P.
    Navarro, V.
    Rodrigo, M. A.
    CHEMICAL ENGINEERING JOURNAL, 2016, 285 : 128 - 136
  • [10] Electro-oxidation treatment used for the remediation of organic polluted soils
    Tican, Ana-Maria
    Istrate, Irina Aura
    UPB Scientific Bulletin, Series D: Mechanical Engineering, 2014, 76 (04): : 215 - 222