Effect of tensile properties on the abrasive wear of steel saw wires used for silicon ingot slicing

被引：13

作者：

Hwang, Bin ^{[1
]}

Park, Kijung ^{[1
]}

Kim, Hoi-Bong ^{[1
]}

Kim, Kwang Ho ^{[1
]}

Bae, Dong-Su ^{[2
]}

Cho, Young-Rae ^{[1
]}

机构：

[1] Pusan Natl Univ, Dept Mat Sci & Engn, Pusan 609735, South Korea

[2] Dong Eui Univ, Dept Adv Mat Engn, Pusan 614714, South Korea

来源：

WEAR | 2012年 / 290卷

关键词：

Wear testing; Rolling-sliding; 3-body abrasion; Steel; Hardness; MICROSTRUCTURE; BEHAVIOR; 2-BODY;

D O I：

10.1016/j.wear.2012.05.004

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The abrasive wear patterns and the tensile properties of steel saw wires (120 mu m in diameter) were investigated in order to develop highly reliable saw wires for the application to silicon (Si) ingot slicing. Saw wires that underwent heat treatment at different linear velocities during the patenting process were subjected to 2-body abrasive wear (2-BAW) and 3-body abrasive wear (3-BAW) tests. The 2-BAW and 3-BAW tests of the saw wires showed opposite trends in abrasive wear resistance. The wear loss resulting from the 2-BAW test was mainly determined by the tensile strength and microhardness of the steel saw wire samples, while the wear loss from the 3-BAW test was primarily determined by the elongation, or ductility, of the samples. (C) 2012 Elsevier B.V. All rights reserved.

引用

页码：94 / 98

页数：5

共 17 条

[1] Effect of microstructural features on ductility in hypo-eutectoid steels [J].

Bae, CM ;

Nam, WJ ;

Lee, CS .

SCRIPTA MATERIALIA, 1999, 41 (06) :605-610

[2] Theoretical analysis on the effects of crystal anisotropy on wiresawing process and application to wafer slicing [J].

Bhagavat, S ;

Kao, I .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2006, 46 (05) :531-541

[3] Two-body and three-body abrasion: A critical discussion [J].

Gates, JD .

WEAR, 1998, 214 (01) :139-146

[4]

HWANG B, 2011, THESIS PUSAN NATL U, V33

[5] Three-body abrasive wear behavior of CC/high-Cr WCI composite and its interfacial characteristics [J].

Li, Yefei ;

Gao, Yimin .

WEAR, 2010, 268 (3-4) :511-518

[6] Abrasive wear behaviour of a high carbon steel: effects of microstructure and experimental parameters and correlation with mechanical properties [J].

Modi, OP ;

Mondal, DP ;

Prasad, BK ;

Singh, M ;

Khaira, HK .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 343 (1-2) :235-242

[7] Basic mechanisms and models of multi-wire sawing [J].

Möller, HJ .

ADVANCED ENGINEERING MATERIALS, 2004, 6 (07) :501-513

[8] MICROSTRUCTURE-MECHANICAL PROPERTY RELATIONSHIPS OF DUAL-PHASE STEEL WIRE [J].

NAKAGAWA, AH ;

THOMAS, G .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1985, 16 (05) :831-840

[9] Optical evaluation of ingot fixity in semiconductor wafer slicing [J].

Ng, TW ;

Nallathamby, R .

OPTICS AND LASER TECHNOLOGY, 2004, 36 (08) :641-645

[10] Three-body impact wear study on conventional and new P/M plus HIPed wear resistant materials [J].

Osara, K ;

Tiainen, T .

WEAR, 2001, 250 :785-794

← 1 2 →