Probabilistic failure assessment of Fibreglass composites

被引：12

作者：

Carpinteri, Andrea ^{[1
]}

Fernandez-Canteli, Alfonso ^{[2
]}

Fortese, Giovanni ^{[1
]}

Muniz-Calvente, Miguel ^{[2
]}

Ronchei, Camilla ^{[1
]}

Scorza, Daniela ^{[1
]}

Vantadori, Sabrina ^{[1
]}

机构：

[1] Univ Parma, Dept Civil Environm Engn & Architecture, Parco Area Sci 181-A, I-43124 Parma, Italy

[2] Univ Oviedo, Dept Construct & Mfg Engn, Campus Viesques, Gijon 33203, Spain

来源：

COMPOSITE STRUCTURES | 2017年 / 160卷

关键词：

Failure assessment; Fibreglass composite; Generalised Probabilistic Approach; Weibull distribution; PROGRESSIVE FAILURE; RELIABILITY; STRENGTH; PLATES;

D O I：

10.1016/j.compstruct.2016.11.010

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

In this paper, the Generalised Probabilistic Approach (GPA) recently proposed by some of the present authors is applied in order to analyse the short fibre-reinforced materials behaviour at failure. Firstly, an experimental campaign consisting of tension tests, three-and four-point bending tests is carried out on a commercial Fibreglass composite. Then, the Primary Cumulative Distribution Function of Failure (PCDFF) is determined by employing both experimental and numerical results. In particular, the PCDFF is derived in two cases: (a) by considering the specimens subjected to the above three loading conditions separately (GPA single application); (b) by collecting both the specimens subjected to tension and those subjected to three-point bending in order to constitute a unique set (GPA joint application). Finally, a comparison between experimental failure probability values and PCDFF, being the latter obtained from both single and joint application of GPA, is provided for each loading condition. (C) 2016 Elsevier Ltd. All rights reserved.

引用

页码：1163 / 1170

页数：8

共 33 条

[1]

[Anonymous], 2010, D627210 ASTM INT

[2]

[Anonymous], D79015E2 ASTM INT

[3]

[Anonymous], 1939, INGENIORS VETENSKAPS

[4] From local to global importance measures of uncertainty propagation in composite structures [J].

Antonio, Carlos Conceicao ;

Hoffbauer, Luisa N. .

COMPOSITE STRUCTURES, 2008, 85 (03) :213-225

[5]

ASTM Standard, 2014, D3039D3039M14 ASTM I, DOI [10.1520/D3039_D3039M-14, DOI 10.1520/D3039_D3039M-14]

[6]

Bernard A., 1955, The plotting of observations on probability-paper

[7] Ncorr: Open-Source 2D Digital Image Correlation Matlab Software [J].

Blaber, J. ;

Adair, B. ;

Antoniou, A. .

EXPERIMENTAL MECHANICS, 2015, 55 (06) :1105-1122

[8] PROBABILISTIC STATIC FAILURE OF COMPOSITE-MATERIAL [J].

CASSENTI, BN .

AIAA JOURNAL, 1984, 22 (01) :103-110

[9] RELIABILITY OF LAMINATED PLATES VIA THE 1ST-ORDER 2ND-MOMENT METHOD [J].

CEDERBAUM, G ;

ELISHAKOFF, I ;

LIBRESCU, L .

COMPOSITE STRUCTURES, 1990, 15 (02) :161-167

[10] On the statistical determination of strength of random heterogeneous materials [J].

Chen, Geng ;

Bezold, Alexander ;

Broeckmann, Christoph ;

Weichert, Dieter .

COMPOSITE STRUCTURES, 2016, 149 :220-230

← 1 2 3 4 →