XPS Characterization of Fiber Surface of Chemithermomechanical Pulp Fibers Modified by White-Rot Fungi

被引:0
作者
Huang, Chongxing [1 ]
Yang, Qifeng [1 ]
Wang, Shuangfei [1 ]
机构
[1] Guangxi Univ, Coll Light Ind & Food Engn, Nanning 530004, Peoples R China
关键词
Bio-modification; Chemithermomechanical pulp fibers; Surface chemistry analysis; XPS; UNBLEACHED KRAFT PULPS; MECHANICAL PULPS; ESCA; SPECTROSCOPY; LIGNIN; AFM;
D O I
暂无
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
In the present paper, the fiber surface chemistry of eucalyptus chemithermomechanical pulp fibers before and after fungal modification was studied with X-ray photoelectron spectroscopy. The results show that the fungal modified chemithermomechanical pulp fibers had a higher O/C ratios and lower C1 percentage than the control pulp fibers and the C1s peak shifted to high binding energy direction. This implies that fungal modified fibers have less lignin and extractives and more hydrophilic groups and carbohydrate on the surface, which is preferred in helpful to forming hydrogen bond. The X-ray photoelectron spectroscopy quantified analysis of surface lignin and extractives contents showed that the content of lignin and extractives contents of fungal modified fiber decreased by 8.3 % and 55.9 %, respectively. However, bulk lignin and extractives contents of fungal modified fiber decreased only by 2.5 % and 11.1 %, respectively. This indicated that the degradation of lignin and extractives mainly took place on fiber surface.
引用
收藏
页码:5476 / 5480
页数:5
相关论文
共 22 条
[1]   Surface characterization of unbleached kraft pulps by enzymatic peeling and ESCA [J].
Buchert, J ;
Carlsson, G ;
Viikari, L ;
Strom, G .
HOLZFORSCHUNG, 1996, 50 (01) :69-74
[2]  
Dorris G.M., 1978, CELL CHEM TECHNOL, V12, P9
[3]  
Fang G., 1999, WOOD IND, V13, P24
[4]   Extractives on fiber surfaces investigated by XPS, ToF-SIMS and AFM [J].
Fardim, P ;
Gustafsson, J ;
von Schoultz, S ;
Peltonen, J ;
Holmbom, B .
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 2005, 255 (1-3) :91-103
[5]  
Gelius U., 1970, Physica Scripta, V2, DOI 10.1088/0031-8949/2/1-2/014
[6]  
Guanben D., 1999, WOOD IND, V13, P17
[7]  
HUA X, 1993, WOOD SCI TECHNOL, V27, P449
[8]  
Jian Z., 2007, CHIN PAPER, V26, P53
[9]   An XPS round robin investigation on analysis of wood pulp fibres and filter paper [J].
Johansson, LS ;
Campbell, JM ;
Fardim, P ;
Hultén, AH ;
Boisvert, JP ;
Ernstsson, M .
SURFACE SCIENCE, 2005, 584 (01) :126-132
[10]   On surface distributions in natural cellulosic fibres [J].
Johansson, LS ;
Campbell, J ;
Koljonen, K ;
Kleen, M ;
Buchert, J .
SURFACE AND INTERFACE ANALYSIS, 2004, 36 (08) :706-710