Laser Welding of Deep Drawing 08Al Killed Steel Sheet

被引:0
作者
Liu, J. [1 ]
Shi, Y. [1 ]
Wang, Y-Q. [2 ]
Yang, Z-K. [2 ]
Zhang, H. [1 ]
机构
[1] Changchun Univ Sci & Technol, Sch Electromech Engn, Changchun 130022, Jilin, Peoples R China
[2] Inner Mongolia First Machinery Grp Corp, Inst Technol, Baotou 014032, Inner Mongolia, Peoples R China
关键词
CO2; laser; laser welding; 08Al killed steel; deep drawing; manufacturing technique; distortion; cylinder;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This paper investigated the laser welding technology on deep drawing 08Al killed steel sheets by slab CO2 laser in order to reduce its welding distortion and improve its welding efficiency. The microstructure of the welded joints was examined with scanning electron microscope (SEM), while the properties were investigated by means of microhardness tester and tensile testing machine. Firstly, welding parameters of laser power, welding speed, and defocusing distance were optimized. Secondly, using of the optimized parameters, the cylinders were manufactured by the laser power of 2.00 kW, welding speed of 1.50 m/min, defocusing distance of 5.00mm, shielding gas of 101/min He and 151/min Ar. After deformation test, it was found that CO2 laser welded cylinders could meet the technical requirements, with the inner diameter of 173(0)(+2)mm and a cylindricity of less than 1.00mm.
引用
收藏
页码:299 / 314
页数:16
相关论文
共 50 条
  • [41] Laser Operating Parameters and Their Influence on the High Speed Welding of Cr-plated Sheet Steel
    Zhan, J.
    LASERS IN ENGINEERING, 2019, 44 (4-6) : 207 - 215
  • [42] Modeling of laser beam welding of stainless steel sheet butt joint using neural networks
    Balasubramanian, K. R.
    Buvanashekaran, G.
    Sankaranarayanasamy, K.
    CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2010, 3 (01) : 80 - 84
  • [43] Investigation on Laser Welding of Al Ribbon to Cu Sheet: Weldability, Microstructure, and Mechanical and Electrical Properties
    Shin, Won-Sang
    Cho, Dae-Won
    Jung, Donghyuck
    Kang, Heeshin
    Kim, Jeng O.
    Kim, Yoon-Jun
    Park, Changkyoo
    METALS, 2021, 11 (05)
  • [44] Study on Monitoring of Plasma Emission Signal in Lap Welding of Zn Coated Steel Sheet Using CO2 Laser
    Lee, Chang-Je
    Kim, Jong-Do
    Kim, Yu-Chan
    INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2015, 16 (03) : 495 - 500
  • [45] Deep drawing behavior of twinning-induced plasticity-cored three-layer steel sheet
    Seung Mi Baek
    Jung Gi Kim
    Jae Ik Yoon
    Min Hong Seo
    Won Tae Cho
    Kwang-Geun Chin
    Sunghak Lee
    Hyoung Seop Kim
    International Journal of Material Forming, 2018, 11 : 11 - 18
  • [46] Process design of combined deep drawing and electromagnetic sharp edge forming of DP980 steel sheet
    Choi, M. K.
    Huh, H.
    Park, N.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2017, 244 : 331 - 343
  • [47] Twist springback characteristics of dual-phase steel sheet after non-axisymmetric deep drawing
    Xue, Xin
    Liao, Juan
    Vincze, Gabriela
    Barlat, Frederic
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2017, 10 (02) : 267 - 278
  • [48] Deep drawing behavior of twinning-induced plasticity-cored three-layer steel sheet
    Baek, Seung Mi
    Kim, Jung Gi
    Yoon, Jae Ik
    Seo, Min Hong
    Cho, Won Tae
    Chin, Kwang-Geun
    Lee, Sunghak
    Kim, Hyoung Seop
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2018, 11 (01) : 11 - 18
  • [49] Twist springback characteristics of dual-phase steel sheet after non-axisymmetric deep drawing
    Xin Xue
    Juan Liao
    Gabriela Vincze
    Frédéric Barlat
    International Journal of Material Forming, 2017, 10 : 267 - 278
  • [50] Autocorrelation analysis of plasma plume light emissions in deep penetration laser welding of steel
    Mrna, Libor
    Sarbort, Martin
    Rerucha, Simon
    Jedlicka, Petr
    JOURNAL OF LASER APPLICATIONS, 2017, 29 (01)