Corrosion of environmentally friendly lanthanum conversion coating on AA2024-T3 aluminum alloy

被引：15
作者：
Gharabagh, R. Shoja [1 ]
Rouhaghdam, A. Sabour [1 ]
机构：
[1] Tarbiat Modares Univ, Dept Mat Sci, Fac Engn, Tehran, Iran
来源：
PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES | 2014年 / 50卷 / 01期
关键词：
DIP GALVANIZED STEEL; RARE-EARTH; CHROMATE REPLACERS; CITRIC-ACID; RESISTANCE; PRETREATMENTS; PERFORMANCE; INHIBITION; ACTIVATION; BEHAVIOR;
D O I：
10.1134/S2070205114010183
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
In this work, lanthanum conversion coating applied on AA2024-T3 aluminum alloy. The coatings were analyzed by optical and scanning electron microscope. The composition and phase structure of the coating were evaluated by EDS and XRD, respectively. Corrosion properties of the coating were investigated by electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization techniques. To explain the corrosion behavior of the coating, equivalent circuit was developed from the measurements. Results showed that the coating has a nanocrystaline structure with crystal size less than 50 nm which is composed of La2O3. Additionally, EIS measurements showed that the lanthanum conversion coating was monolayer. Measurements taken by polarization tests showed that the coating increased corrosion potential and decreased corrosion current density approximately one order of magnitude.
引用
收藏
页码：88 / 93
页数：6
相关论文
共 38 条
[1]  
[Anonymous], 1998, ASM HDB, V5
[2]   Lanthanide salts as thermal conversion coatings on silicon carbide reinforced AA5Ao6 aluminium metal matrix composite [J].
Aziz, I. ;
Zhang, Q. .
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2010, 61 (07) :568-573
[3]   Active metal-based corrosion protective coating systems for aircraft requiring no-chromate pretreatment [J].
Bierwagen, Gordon ;
Brown, Roger ;
Battocchi, Dante ;
Hayes, Scott .
PROGRESS IN ORGANIC COATINGS, 2010, 68 (1-2) :48-61
[4]   Mechanistic studies of the corrosion of 2024 aluminum alloy in nitrate solutions [J].
Blanc, C ;
Gastaud, S ;
Mankowski, G .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2003, 150 (08) :B396-B404
[5]   The electrochemical characteristics of bulk-synthesized Al2CuMg [J].
Buchheit, RG ;
Montes, LP ;
Martinez, MA ;
Michael, J ;
Hlava, PF .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1999, 146 (12) :4424-4428
[6]   Local dissolution phenomena associated with S phase (Al2CuMg) particles in aluminum alloy 2024-T3 [J].
Buchheit, RG ;
Grant, RP ;
Hlava, PF ;
Mckenzie, B ;
Zender, GL .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1997, 144 (08) :2621-2628
[7]   Influence of surface preparation on performance of chromate conversion coatings on Alclad 2024 aluminium alloy Part II: EIS investigation [J].
Campestrini, P ;
van Westing, EPM ;
de Wit, JHW .
ELECTROCHIMICA ACTA, 2001, 46 (17) :2631-2647
[8]   Corrosion mechanisms of steel concrete moulds in contact with a demoulding agent studied by EIS and XPS [J].
Carnot, A ;
Frateur, I ;
Zanna, S ;
Tribollet, B ;
Dubois-Brugger, I ;
Marcus, P .
CORROSION SCIENCE, 2003, 45 (11) :2513-2524
[9]   Cerium-based conversion layers on aluminum alloys [J].
Dabalà, M ;
Armelao, L ;
Buchberger, A ;
Calliari, I .
APPLIED SURFACE SCIENCE, 2001, 172 (3-4) :312-322
[10]   Influence of pre-treatments in cerium conversion treatment of AA2024-T3 and 7075-T6 alloys [J].
de Frutos, A. ;
Arenas, M. A. ;
Liu, Y. ;
Skeldon, P. ;
Thompson, G. E. ;
De Damborenea, J. ;
Conde, A. .
SURFACE & COATINGS TECHNOLOGY, 2008, 202 (16) :3797-3807
1234