EFFECTS OF TEMPERATURE AND FORMING SPEED ON PLASTIC BENDING OF ADHESIVELY BONDED SHEET METALS

被引：6

作者：

Takiguchi, Michihiro ^{[1
]}

Yoshida, Tetsuya ^{[2
]}

Yoshida, Fusahito ^{[3
]}

机构：

[1] Hiroshima Natl Coll Maritime Technol, Dept Maritime Technol, Hiroshima 7250231, Japan

[2] Hiroshima Natl Coll Maritime Technol, Dept Elect Control Engn, Hiroshima 7250231, Japan

[3] Hiroshima Univ, Dept Mech Syst Engn, Higashihiroshima 7398527, Japan

来源：

INTERNATIONAL JOURNAL OF MODERN PHYSICS B | 2008年 / 22卷 / 31-32期

关键词：

Plastic working; bending; adhesive joints; temperature and rate-dependent shear strength; experimental strain analysis; numerical analysis; constitutive equation;

D O I：

10.1142/S021797920805187X

中图分类号：

O59 [应用物理学];

学科分类号：

摘要：

This paper deals with the temperature and rate-dependent elasto-viscoplasticity behaviour of a highly ductile acrylic adhesive and its effect on plastic bending of adhesively bonded sheet metals. Tensile lap shear tests of aluminium single-lap joints were performed at various temperature of 10-40 degrees C at several tensile speeds. Based on the experimental results, a new constitutive model of temperature and rate-dependent elasto-viscoplasticity of the adhesive is presented. From V-bending experiments and the corresponding numerical simulation, it was found that the gull-wing bend is suppressed by high-speed forming at a lower temperature.

引用

页码：6253 / 6258

页数：6

共 50 条

[1] EFFECTS OF TEMPERATURE AND FORMING SPEED ON PLASTIC BENDING OF ADHESIVELY BONDED SHEET METALS
Takiguchi, Michihiro
Yoshida, Tetsuya
Yoshida, Fusahito
ENGINEERING PLASTICITY AND ITS APPLICATIONS: FROM NANOSCALE TO MACROSCALE, 2009, : 881 - +
[2] Effects of temperature and forming speed on plastic bending of adhesively bonded sheet metals
Yoshida, Tetsuya
Takiguchi, Michihiro
Yoshida, Fusahito
Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 2007, 73 (02): : 292 - 299
[3] Effect of forming speed on plastic bending of adhesively bonded sheet metals
Takiguchi, M
Yoshida, F
JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING, 2004, 47 (01) : 47 - 53
[4] Effect of forming speed on plastic bending of adhesively bonded sheet metals
Hiroshima Natl. Coll. Mar. Technol., Dept. of Maritime Technology, 4272-1 Higashino-cho, Toyota-gun, Hiroshima, 725-0200, Japan
Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 2002, 68 (08): : 1236 - 1242
[5] Plastic-bending of Adhesively Bonded Dissimilar Sheet Metals
Takiguchi, Michihiro
Tokuda, Taro
Yoshida, Tetsuya
Funaki, Mitsuo
Hamasaki, Hiroshi
Yoshida, Fusahito
ADVANCES IN ENGINEERING PLASTICITY XI, 2013, 535-536 : 418 - +
[6] Effects of Thicknesses of Sheet and Adhesive Layer on Plastic-bending of Adhesively Bonded Sheet Metals
Takiguchi, Michihiro
Yoshida, Tetsuya
Funaki, Mitsuo
Yoshida, Fusahito
ADVANCES IN ENGINEERING PLASTICITY XI, 2013, 535-536 : 381 - +
[7] Plastic bending of adhesive-bonded sheet metals
Takiguchi, M
Yoshida, F
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 113 (1-3) : 743 - 748
[8] Elastic-plastic bending deformation of adhesively bonded sheet metals in tensile lap shear tests with special reference to effect of tensile speed
Takiguchi, M
Yoshida, T
Yoshida, F
ADVANCES IN ENGINEERING PLASTICITY AND ITS APPLICATIONS, PTS 1 AND 2, 2004, 274-276 : 805 - 810
[9] Deformation characteristics and delamination strength of adhesively bonded aluminium alloy sheet under plastic bending
Takiguchi, M
Yoshida, F
JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING, 2003, 46 (01) : 68 - 75
[10] Deformation behavior of adhesive layer in stretch-bending/unbending for adhesively bonded sheet metals
Takiguchi, Michihiro
Tokuda, Taro
Yoshida, Tetsuya
Uemori, Takeshi
Yoshida, Fusahito
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES XVI, 2014, 939 : 19 - +

← 1 2 3 4 5 →