Surface Characterization and Wear Behaviour of Laser Surface Melted AISI 316L Stainless Steel

被引：0
作者：
Kumar, A. [1 ]
Pityana, S. [2 ]
Majumdar, J. Dutta [1 ]
机构：
[1] Indian Inst Technol, Dept Met & Mat Engn, Kharagpur 721302, W Bengal, India
[2] CSIR, Natl Laser Ctr, ZA-0001 Pretoria, South Africa
来源：
LASERS IN ENGINEERING | 2013年 / 24卷 / 3-4期
关键词：
AISI 316L stainless steel; Nd:YAG laser; laser surface melting; microstructure; hardness; wear; CORROSION;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The present study concerns an in depth investigation of the influence of laser surface melting of AISI 316L stainless steel using Ar and N-2 as shrouding atmosphere. Laser surface melting has been carried out using a 5 kW continuous wave (CW) fibre optics delivery Nd:YAG laser with a beam diameter of 4 mm. Microstructure of the surface melted layer consists of grain refined austenite when melted in Ar shroud and iron nitrides (Fe4N) and chromium nitrides (Cr2N) dispersed in gamma-Fe matrix when melted in N-2 shroud. Lattice strain and residual stress are also reduced by laser surface melting. The average microhardness of the melt zone increases from 240 VHN (for as-received AISI 316L stainless steel) to 375 VHN and 475 VHN for laser surface melted AISI 316L stainless steel in Ar and N-2 atmosphere, respectively. Fretting wear behaviour against hardened steel ball shows a significant improvement in fretting wear resistance due to laser surface melting with a maximum improvement achieved in N-2 shroud.
引用
收藏
页码：147 / 166
页数：20
相关论文
共 50 条
[31]   Effect of Microstructural Bands on the Localized Corrosion of Laser Surface-Melted 316L Stainless Steel [J].
Hwa, Yoon ;
Kumai, Christopher S. ;
Yang, Nancy ;
Yee, Joshua K. ;
Devine, Thomas M. .
CORROSION, 2021, 77 (09) :1014-1024
[32]   Investigation of Wear and Corrosion Behaviour of AISI 316 L Stainless Steel Coated By ESD Surface Modification [J].
Protection of Metals and Physical Chemistry of Surfaces, 2019, 55 :1148-1153
[33]   Surface hardening of AISI 316L stainless steel using plasma carburizing [J].
Suh, BS ;
Lee, WJ .
THIN SOLID FILMS, 1997, 295 (1-2) :185-192
[34]   High temperature tribology and wear of selective laser melted (SLM) 316L stainless steel [J].
Alvi, Sajid ;
Saeidi, Kamran ;
Akhtar, Farid .
WEAR, 2020, 448
[35]   Improving corrosion resistance of selective laser melted 316L stainless steel through ultrasonic severe surface rolling [J].
Sun, Jiapeng ;
Sun, Qisheng ;
Liu, Ying ;
Li, Bangjun ;
Zhang, Zheng ;
Xu, Bingqian ;
Xu, Songsong ;
Han, Ying ;
Qiao, Yanxin ;
Han, Jing ;
Wu, Guosong ;
Chu, Paul K. .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 20 :4378-4391
[36]   Investigation of the anisotropic cyclic damage behavior of selective laser melted AISI 316L stainless steel [J].
Stern, Felix ;
Kleinhorst, Jan ;
Tenkamp, Jochen ;
Walther, Frank .
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2019, 42 (11) :2422-2430
[37]   Cavitation erosion resistance of AISI 316L stainless steel laser surface-modified with NiTi [J].
Chiu, KY ;
Cheng, FT ;
Man, HC .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 392 (1-2) :348-358
[38]   Characterization of borided AISI 316L stainless steel implant [J].
Özbek, I ;
Konduk, BA ;
Bindal, C ;
Ucisik, AH .
VACUUM, 2002, 65 (3-4) :521-525
[39]   Tensile Properties of Selective Laser Melted 316L Stainless Steel [J].
Yu Chenfan ;
Zhao Congcong ;
Zhang Zhefeng ;
Liu Wei .
ACTA METALLURGICA SINICA, 2020, 56 (05) :683-692
[40]   Strengthening mechanisms in selective laser melted 316L stainless steel [J].
Chen, Siqi ;
Ma, Guoqiang ;
Wu, Guilin ;
Godfrey, Andrew ;
Huang, Tianlin ;
Huang, Xiaoxu .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 832
12345