Study on Milling Parameters Optimization in Remanufacturing Cold-welding Area

被引：3
|
作者：
Xu, Qingzhong [1 ]
Li, Fangyi [1 ]
Ma, Shilei [1 ]
Liu, Junzhuang [1 ]
机构：
[1] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China
来源：
ADVANCES IN MATERIALS PROCESSING X | 2012年 / 500卷
关键词：
Cold-welding; Remanufacturing; Milling; Parameters Optimization;
D O I：
10.4028/www.scientific.net/AMR.500.123
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Considering cold-welding repaired layer is rough and microstructure contains hard phases, firstly, the two-factor three-level orthogonal milling experiment was conducted in remanufacturing cold-welding repaired area, then the influences of different parameters on Ni-base cold-welding repaired layer milling were studied. At the end, cutting force and surface roughness were used as objectives to optimize the milling parameters. Cutting force and surface roughness were processed by range analysis, and their influence sequences were obtained. The empirical formula of milling force and surface roughness can be obtained through linear regression method, which provided theoretical base for the prediction. The influences on cutting force and surface roughness of different parameters were studied to further optimization, which can provide technical support for high efficiency and precision cutting in cold-welding area.
引用
收藏
页码：123 / 127
页数：5
相关论文
共 50 条
  • [31] Optimization Study of Steam Turbine Cold End Parameters
    Chen Jiangong Northwest Electric Power Design Institute
    Electricity, 1996, (03) : 32 - 35
  • [32] Optimization of Molybdenum Powder Milling Parameters
    Lucie, Dyckova
    Pavel, Komarov
    Michaela, Remesova
    Martin, Dycka
    Karel, Dvorak
    Melita, Menelaou
    Ladislav, Celko
    OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE, 2018, 20 (03): : 109 - 122
  • [33] Optimization of cryogenic milling parameters for AFRP
    Fengbiao Wang
    Jingkai Liu
    Qilin Shu
    The International Journal of Advanced Manufacturing Technology, 2017, 91 : 3243 - 3252
  • [34] On the optimization of machining parameters for milling operations
    ToloueiRad, M
    Bidhendi, IM
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1997, 37 (01): : 1 - 16
  • [35] OPTIMIZATION OF THE TECHONOLOGICAL PARAMETERS IN THE MILLING PROCESS
    Pop, Dumitru
    Morar, Liviu
    Campean, Emilia
    Tanase, Ionela
    ACTA TECHNICA NAPOCENSIS SERIES-APPLIED MATHEMATICS MECHANICS AND ENGINEERING, 2012, 55 (01): : 227 - 232
  • [36] Optimization of milling parameters by GA approach
    Cus, F
    Balic, J
    Kopac, J
    SYSTEM SIMULATION AND SCIENTIFIC COMPUTING (SHANGHAI), VOLS I AND II, 2002, : 974 - 979
  • [37] Optimization of cryogenic milling parameters for AFRP
    Wang, Fengbiao
    Liu, Jingkai
    Shu, Qilin
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 91 (9-12): : 3243 - 3252
  • [38] Study on particle size and X-ray peak area ratios in high energy ball milling and optimization of the milling parameters using response surface method
    Erdemir, Fatih
    MEASUREMENT, 2017, 112 : 53 - 60
  • [39] Deformation-induced cold-welding for self-healing of super-durable flexible transparent electrodes
    Guo, Chuan Fei
    Lan, Yucheng
    Sun, Tianyi
    Ren, Zhifeng
    NANO ENERGY, 2014, 8 : 110 - 117
  • [40] Quantitative study of the milling parameters in vibratory milling
    Chen K.
    Nguyen H.B.
    Wu D.
    Liu F.
    Qinghua Daxue Xuebao/Journal of Tsinghua University, 2016, 56 (03): : 328 - 333
12345