The effect of La2O3 addition on intermetallic-free aluminium matrix composites reinforced with TiC and Al2O3 ceramic particles

被引:40
作者
Ao, Min [1 ,2 ]
Liu, Huimin [1 ]
Dong, Chaofang [2 ]
机构
[1] Inner Mongolia Univ Technol, Inner Mongolia Key Lab Light Met Mat, Sch Mat Sci & Engn, Hohhot, Peoples R China
[2] Univ Sci & Technol Beijing, Key Lab Corros & Protect MOE, Corros & Protect Ctr, Beijing 100083, Peoples R China
关键词
Aluminium matrix composites; La2O3; TiC; Al2O3; IN-SITU SYNTHESIS; FORMATION MECHANISM; AL; MICROSTRUCTURE; PERFORMANCE; TITANIUM; POWDERS; LIQUID; ALLOYS;
D O I
10.1016/j.ceramint.2019.03.093
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
In this work, intermetallic-free aluminium matrix composites reinforced with TiC and Al2O3 ceramic particles were successfully prepared via an in situ reaction of Al-Ti-C-CuO-La2O3 during self-propagating high-temperature synthesis. The effect of adding the rare earth metal oxide La2O3 was studied by using differential scanning calorimetry, X-ray diffraction, scanning electron microscopy, optical microscopy and Brinell hardness tests. The results showed that La2O3 could promote the wettability of the C and Al melt in the Al-Ti-C-CuO system. The final products of the in situ reaction for the 2.5Al-1Ti-1.2C-0.5CuO-0.005La(2)O(3) system were TiC particles and Al2O3 particles, and the system was free of intermetallic compounds. The prepared aluminium matrix composites were greatly refined with an average grain size of 20.6 mu m. The intermetallic-free aluminium matrix composites reinforced with TiC and Al2O3 particles showed up to two times higher Brinell hardness value than the matrix 6063 aluminium alloy.
引用
收藏
页码:12001 / 12009
页数:9
相关论文
共 34 条
[1]  
Abinash B, 1986, Metall Mater Trans A, V17, P2127
[2]   Production of Al-Ti-C grain refiner alloys by reactive synthesis of elemental powders: Part I. Reactive synthesis and characterization of alloys [J].
Brinkman, HJ ;
Zupanic, F ;
Duszczyk, J ;
Katgerman, L .
JOURNAL OF MATERIALS RESEARCH, 2000, 15 (12) :2620-2627
[3]   Al-TiC Composites Fabricated by a Thermally Activated Reaction Process in an Al Melt Using Al-Ti-C-CuO Powder Mixtures: Part II. Microstructure Control and Mechanical Properties [J].
Cho, Young-Hee ;
Lee, Jung-Moo ;
Kim, Su-Hyeon .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (03) :1374-1384
[4]  
Cho Young-Hee, 2014, METALL MAT T, V45
[5]   EFFECT OF ALUMINUM ADDITION ON THE COMBUSTION REACTION OF TITANIUM AND CARBON TO FORM TIC [J].
CHOI, Y ;
RHEE, SW .
JOURNAL OF MATERIALS SCIENCE, 1993, 28 (24) :6669-6675
[6]   High-temperature phase equilibria in the Al-rich corner of the Al-Ti-C system [J].
Frage, N ;
Frumin, N ;
Levin, L ;
Polak, M ;
Dariel, MP .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1998, 29 (04) :1341-1345
[7]   Composites fabricated by self-propagating high-temperature synthesis [J].
Fu, ZY ;
Wang, H ;
Wang, WM ;
Yuan, RZ .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 137 (1-3) :30-34
[8]   MATERIAL SELECTION FOR HARD COATINGS [J].
HOLLECK, H .
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 1986, 4 (06) :2661-2669
[9]   Development of an aluminum/amorphous nano-SiO2 composite using powder metallurgy and hot extrusion processes [J].
Issa, Hasan Kaser ;
Taherizadeh, Aboozar ;
Maleki, Ali ;
Ghaei, Abbas .
CERAMICS INTERNATIONAL, 2017, 43 (17) :14582-14592
[10]  
Jin Shenbao, 2015, CRYST GROWTH DES, V10, P1590