HARDENING RESPONSE TO RAPID AGING PROCESSES AND PRECIPITATION IN Al-7%Si-0.3%Mg ALLOY

被引：0
作者：
Liao, Hengcheng [1 ]
Wu, Yuna [1 ]
Ding, Ke [1 ]
机构：
[1] Southeast Univ, Sch Mat Sci & Engn, Jiangsu Key Lab Adv Metall Mat, Campus Southeast Univ, Nanjing 211189, Jiangsu, Peoples R China
来源：
PROCEEDINGS OF THE 13TH INTERNATIONAL CONFERENCE ON ALUMINUM ALLOYS (ICAA13) | 2012年
关键词：
Al-Si-Mg alloy; aging; precipitation hardenening; mechanical properties; microstructure; SI;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
An orthogonal test was designed to obtain a optimized rapid aging process in order to shorten aging time. Hardness and tensile tests and TEM observation were used to evaluate the hardening response to the rapid aging process. An optimized rapid aging process, 160 degrees C2h+200 degrees C2h, is obtained. Under this process, the alloy has an approximately equal hardness and strength to the conventional single stage peak aging process, but the aging time of the rapid aging process is remarkably shortened, only 16.7% of the conventional process. Compared with the conventional aging process, the number density of beta '' precipitates formed during the rapid aging course is reduced, however, the amount of beta' precipitates is remarkably increased. Though the contribution of the beta '' precipitates to hardening is reduced, that of the high density of beta' rod precipitates is considerably increased, thus the rapid aging process produces an approximately equal hardening effect to the conventional peak aging process.
引用
收藏
页码：1113 / 1118
页数：6
相关论文
共 50 条
[41]   Effect of Ca modification on the elemental composition, microstructure and tensile properties of Al-7Si-0.3Mg alloy [J].
Jia-hong Zhang ;
Shu-ming Xing ;
Xiao-hui Ao ;
Peng Sun ;
Ru-fen Wang .
International Journal of Minerals, Metallurgy and Materials, 2019, 26 :1457-1466
[42]   Influence of Severe Plastic Deformation on Precipitation Hardening in an Al-Mg-Si Alloy: Microstructure and Mechanical Properties [J].
Tsai, Meng-Shan ;
Sun, Pei-Ling ;
Kao, Po-Wen ;
Chang, Chih-Pu .
MATERIALS TRANSACTIONS, 2009, 50 (04) :771-775
[43]   Rapid bake-hardening response of Al-Mg-Si alloy during two-stage pre-aging heat treatment [J].
Duan, Xiaoge ;
Mi, Zhenli ;
Jiang, Haitao ;
Wu, Yanxin ;
Wang, Jiayi .
MATERIALS RESEARCH EXPRESS, 2019, 6 (07)
[44]   Tensile and creep properties of Al-7Si-0.3Mg alloy with Zr and Er addition [J].
Rashno, S. ;
Reihanian, M. ;
Ranjbar, Khalil .
MATERIALS SCIENCE AND TECHNOLOGY, 2020, 36 (14) :1603-1613
[45]   Microstructure and Impression Creep Behavior of Al-7Si-0.3Mg Alloy with Zr Addition [J].
Reihanian, M. ;
Ranjbar, Khalil ;
Rashno, S. .
METALS AND MATERIALS INTERNATIONAL, 2021, 27 (08) :2530-2540
[46]   Effect of Deep Cryogenic Treatment on Aging Processes of Al–Mg–Si Alloy [J].
Ying Yuanchun Huang ;
Xianwei Li ;
Zhengbing Ren .
Physics of Metals and Metallography, 2019, 120 :914-918
[47]   Impression creep characterization of cast Al-7Si-0.3Mg alloy [J].
Rashno, S. ;
Ranjbar, Khalil ;
Reihanian, M. .
MATERIALS RESEARCH EXPRESS, 2019, 6 (08)
[48]   Eutectic nucleation in Al-7 wt pct Si-Mg casting alloys [J].
Chen, Zhongwei ;
Ma, Cuiying ;
Zhao, Jing .
ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2012, 25 (05) :340-346
[49]   Influence of Aging Temperature on Precipitation Kinetics, Morphology and Hardening Behavior of Al-7475 Alloy [J].
Zeid, E. F. Abo .
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2019, 44 (07) :6621-6629
[50]   Precipitation-hardening in cast AL-Si-Cu-Mg alloys [J].
Tavitas-Medrano, F. J. ;
Mohamed, A. M. A. ;
Gruzleski, J. E. ;
Samuel, F. H. ;
Doty, H. W. .
JOURNAL OF MATERIALS SCIENCE, 2010, 45 (03) :641-651
12345