Tuning the Magnetic Properties of ZnFe2O4 Nanoparticles Through Partial Doping and Annealing

The aim of this study was to investigate the effect of annealing temperature and cobalt cation (Co2+) doping on the magnetic properties of zinc ferrite (ZFO) nanoparticles. The nanoparticles were prepared through sol-gel combustion process with citric acid as the fuel. The obtained nanoparticles were annealed at several temperatures from 300 to 1000 degrees C for 2 h. Spinel formation was proved by X-ray diffraction (XRD) patterns, and the average crystallite size in all samples was estimated between 22 and 32 nm. It is worthwhile to mention that Fe2O3 and ZnO are detected as the medium phases. Meanwhile, Fe2O3 phase transformation to the other allotropes has happened around 400 degrees C and was characterized via the simultaneous thermal analysis (STA) and XRD. For higher annealing temperatures, diffusion has gradually been completed and, finally, the single phase of spinel structure was prepared at 1000 degrees C. In addition, field-emission scanning electron microscopy (FESEM) images revealed that the nanoparticle size after annealing was between 30 and 200 nm for the whole samples. The formation of the spinel phase was considered the most important factor on the magnetic properties of ZFO. Cobalt doping, annealing temperature, and also Fe2O3 phase were the main factors on changing magnetic properties. Paramagnetic nanoparticles with higher coercivity for doped samples rather than un-doped samples have been obtained.