The effect of Tb substitution for Ni on microstructure, martensitic transformation and cyclic stability of elastocaloric effect in Ni-Mn-Sn magnetic shape memory alloys

Cyclic stability of elastocaloric effect is the key factor that restricts the elastocaloric cooling application of Ni-Mn-Sn alloys fabricated by the conventional melting technique. Element doping is an effective way to enhance the performance of materials. In this work, the effect of Tb substitution for Ni on martensitic transformation (MT) temperature, microstructure, mechanical properties and cyclic stability of elastocaloric effect in the Ni43.5-xTbxMn45.5Sn11 (x = 0, 0.6, 1.2 and 1.8) magnetic shape memory alloys has been investigated. MT temperatures increase with increasing x from 0 to 1.2 and then decrease with further increasing x to 1.8. The substitution of Tb for Ni introduces gamma phase (Tb-rich second phase in Tb-doping alloys). The volume fraction of gamma phase increases with increasing Tb content and thus the mechanical properties and the cyclic stability of elastocaloric effect increase with the increase of Tb content. Among these alloys, Ni42.3Tb1.2Mn45.5Sn11 alloy shows a large adiabatic temperature change of 10.0 K induced by applying the uniaxial stress of 550 MPa. In addition, a constant temperature change of 6.5 K shows no apparent degradation under the compressive stress of 350 MPa during 1000 cycles for this alloy. The excellent elastocaloric properties make this alloy a promising candidate for the room-temperature elastocaloric cooling application. The underlying mechanism of the enhanced cyclability of elastocaloric effect and mechanical properties is also revealed. (C) 2022 The Author(s). Published by Elsevier B.V.