A study of pneumatic conveying of gas-solid flow for industrial application

被引:0
作者
Al-Khateeb, Khalid A. S. [1 ]
Tasnim, Humana [1 ]
Khan, Sheroz [1 ]
Mohammod, Musse [1 ]
Arshad, Atika [1 ]
Shobaki, Mohammed M. [1 ]
Haider, Samnan [1 ]
Saquib, Nazmus [1 ]
Rahman, Tawfilur [1 ]
机构
[1] Int Islamic Univ, Dept Elect & Comp Engn, Kuala Lumpur 53100, Malaysia
来源
5TH INTERNATIONAL CONFERENCE ON MECHATRONICS (ICOM'13) | 2013年 / 53卷
关键词
INTERFACE CIRCUIT; SENSOR; VELOCITY;
D O I
10.1088/1757-899X/53/1/012035
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The complicated nature of gas-solids' physical properties have challenged the researchers over past decades who have led their efforts in developing its' flow sensing and measurement methods. The term 'gas-solid flow' signifies dilute- or dense-phase flow with a very little concentration of solids. For conducting such flow measurement, generally velocity profile and volumetric concentration of the flow particles being conveyed are needed to be measured. An important application of gas-solid flow has taken root in the form of biomass flow in pneumatic conveying systems, and its online measurement has proven to be an exigent research pursuit. Additionally the other applications have been explored in power plants, food, chemical and automobiles industries as well. This paper aims at exploring the evolution of flow measurement methods along with a brief explanation on existing fundamental sensing techniques. Furthermore, the most recent patents developed for such measurements in pneumatic conveying pipelines are scrutinized along with their concomitant pros and cons.
引用
收藏
页数:9
相关论文
共 28 条
[1]   Design rules for robust capacitive sensors [J].
Brasseur, G .
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2003, 52 (04) :1261-1265
[2]   Versatile programmable integrated interface for robust capacitive sensors [J].
Bretterklieber, Th. ;
Zangl, H. ;
Holler, G. ;
Hrach, D. ;
Hammerschmidt, D. ;
Motz, M. .
ELEKTROTECHNIK UND INFORMATIONSTECHNIK, 2008, 125 (04) :132-137
[3]  
Carter R.M, 2004, IEEE INSTR MEAS TECH, V2, P864
[4]   A semicylindrical capacitive sensor with interface circuit used for flow rate measurement [J].
Chiang, Cheng-Ta ;
Huang, Yu-Chung .
IEEE SENSORS JOURNAL, 2006, 6 (06) :1564-1570
[5]  
Cui Heping, 2006, CHINA PART, V4, P183
[6]  
Cui Heping, 2006, CHINA PART, V4, P133
[7]   Characterization of slug flows in horizontal piping by signal analysis from a capacitive probe [J].
dos Reis, Emerson ;
Goldstein, Leonardo, Jr. .
FLOW MEASUREMENT AND INSTRUMENTATION, 2010, 21 (03) :347-355
[8]   Application of capacitance tomography to gas-solid flows [J].
Dyakowski, T ;
Edwards, RB ;
Xie, CG ;
Williams, RA .
CHEMICAL ENGINEERING SCIENCE, 1997, 52 (13) :2099-2110
[9]   Electrostatic nonintrusive method for measuring the electric charge, mass flow rate, and velocity of particulates in the two-phase gas-solid pipe flows - Its only or as many as 50 years of historical evolution [J].
Gajewski, Juliusz B. .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2008, 44 (05) :1418-1430
[10]  
Ghazimoghadam M. A., 2011, Proceedings 2011 IEEE Symposium on Industrial Electronics and Applications (ISIEA 2011), P7, DOI 10.1109/ISIEA.2011.6108814