Development of high voltage power supply for the KSTAR 170 GHz ECH and CD system

被引：4

作者：

Jeong, J. H. ^{[1
]}

Bae, Y. S. ^{[1
]}

Joung, M. ^{[1
]}

Kim, H. J. ^{[1
]}

Park, S. I. ^{[1
]}

Han, W. S. ^{[1
]}

Kim, J. S. ^{[1
]}

Yang, H. L. ^{[1
]}

Kwak, J. G. ^{[1
]}

Sakamoto, K. ^{[2
]}

Kajiwara, K. ^{[2
]}

Oda, Y. ^{[2
]}

Hayashi, K. ^{[2
]}

机构：

[1] Natl Fus Res Inst, Taejon, South Korea

[2] Japan Atom Energy Agcy, Naka, Ibaraki, Japan

来源：

FUSION ENGINEERING AND DESIGN | 2013年 / 88卷 / 05期

基金：

新加坡国家研究基金会;

关键词：

ECH; ECCD; High voltage power supply; Gyrotron;

D O I：

10.1016/j.fusengdes.2013.03.078

中图分类号：

TL [原子能技术]; O571 [原子核物理学];

学科分类号：

0827 ; 082701 ;

摘要：

A 3.6 MW (66 kV/55 A) DC power supply system was developed for the 170 GHz EC H&CD system in KSTAR. The power supply system consists of a cathode power supply (CPS), an anode power supply (APS) and a body power supply (BPS). The cathode power supply is capable of supplying a maximum voltage of -66 kV and a current of 55 A to the cathode with respect to the collector using pulse step modulation (PSM). The high voltage switching system for the cathode is made by a fast MOS-FET solid-state switch which can turn off the high voltage to the cathode within 3 mu s in the occurrence of gyrotron faults. The APS is a voltage divider system consisting of a fixed resistor and zener diode units with the capability of 60 kV stand-off voltage. The anode voltage with respect to the cathode is controlled in a range of 0-60 kV by turning the MOS-FET switches connected in parallel to each zener diode on and off. For high frequency current modulation of the gyrotron, the parallel discharge switch is introduced between the cathode and anode in order to clamp the charged voltage in the stray capacitance. The BPS is a DC power supply with the capability of 50 kV/160 mA. The nominal operation parameter of BPS was 23 kV and 10 mA, respectively, and the voltage output is regulated with a stability of 0.025% of the rated voltage. The series MOS-FET solid-state switch is used for on/off modulation in the body voltage sychronizing with anode voltage. The parallel discharge switch is also introduced between the body and collector for high frequency RF modulation. This paper describes the key features of the high voltage power supply system of the KSTAR 170 GHz gyrotron as well as the test results of the power supply. (c) 2013 Elsevier B.V. All rights reserved.

引用

页码：380 / 387

页数：8

共 11 条

[1] Alex J, 1995, SOFE '95 - 16TH IEEE/NPSS SYMPOSIUM ON FUSION ENGINEERING, VOLS 1 AND 2, P936, DOI 10.1109/FUSION.1995.534378
[2] ELECTRON CYCLOTRON HEATING AND CURRENT DRIVE PROGRAM FOR KSTAR BASED ON THE 170-GHz GYROTRON
Bae, Y. S.
Joung, M.
Yang, H. L.
Namkung, W.
Cho, M. H.
Park, H.
Prater, R.
Ellis, R. A.
Hosea, J.
[J]. FUSION SCIENCE AND TECHNOLOGY, 2011, 59 (04) : 640 - 646
[3] High frequency/high voltage solid state body power supplies for CPD gyrotrons
Bonicelli, T
Claesen, R
Coletti, A
Mondino, PL
Pretelli, M
Santinelli, M
Sita, L
Taddia, G
[J]. FUSION ENGINEERING AND DESIGN, 2003, 66-68 : 543 - 548
[4] Forster W., 2002, Conference Record of the Twenty-Fifth International Power Modulator Symposium and 2002 High-Voltage Workshop (Cat. No.02CH37381), P126, DOI 10.1109/MODSYM.2002.1189432
[5] High voltage power supplies for ITER RF heating and current drive systems
Gassmann, T.
Arambhadiya, B.
Beaumont, B.
Baruah, U. K.
Bonicelli, T.
Darbos, C.
Purohit, D.
Decamps, H.
Albajar, F.
Gandini, F.
Henderson, M.
Kazarian, F.
Lamalle, P. U.
Omori, T.
Parmar, D.
Patel, A.
Rathi, D.
Singh, N. P.
[J]. FUSION ENGINEERING AND DESIGN, 2011, 86 (6-8) : 884 - 887
[6] Jeong J.H., 2012, 17 JOINT WORKSH EL C, V32, P02019
[7] Kajiwara K., 2011, FUS ENG SOFE IEEE NP
[8] Kajiwara K., T FUSION SC IN PRESS
[9] Progress of high power 170 GHz gyrotron in JAEA
Sakamoto, Keishi
Kasugai, Atsushi
Kajiwara, Ken
Takahashi, Koji
Oda, Yasuhisa
Hayashi, Kazuo
Kobayashi, Noriyuki
[J]. NUCLEAR FUSION, 2009, 49 (09)
[10] Shim E.-Y., 2012, 17 JOINT WORKSH EL C, V32, P04011

← 1 2 →