Effect of Rare Earth Ce on the Microstructure and Mechanical Properties of 34CrNiMo6 Steel for Wind Turbine Main Shaft

被引:0
|
作者
Ge, Yanming [1 ]
Wang, Kehong [1 ]
机构
[1] Nanjing Univ Sci & Technol, Sch Mat Sci & Engn, Nanjing 210094, Jiangsu, Peoples R China
基金
中国国家自然科学基金;
关键词
D O I
10.1155/2019/8135253
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The effect of rare earth Ce on mechanical properties is studied by investigating the precipitates evolution during heat treatment of 34CrNiMo6 steel. Five different rare earth Ce contents are carried out with the same holding time 3hours. Then, the mechanical properties of 34CrNiMo6 steel are obtained under steady state conditions and impact conditions, respectively. The strength decreases while the elongation after breakage increases with the rare earth Ce content increasing. The impact absorbing energy at 20 degrees C and -40 degrees C increases with the rare earth Ce content increasing. Based on the experimental results, the recommended rare earth Ce content is 0.05 wt.%. The differences in mechanical properties among the different rare earth Ce contents may be the nucleation rate and growth of precipitates under different conditions. The spherification degree of cementite is more complete with rare earth Ce content, resulting in the decrease of mechanical properties and improvement of ductility.
引用
收藏
页数:9
相关论文
共 50 条
  • [21] Effects of cooling condition on microstructure and mechanical properties in laser rapid forming of 34CrNiMo6 thin-wall component
    Huang Chunping
    Lin Xin
    Liu Fencheng
    Cao Jun
    Liu Fenggang
    Huang Weidong
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 82 (5-8): : 1269 - 1279
  • [22] Mean Stress Effect on the Axial Fatigue Strength of DIN 34CrNiMo6 Quenched and Tempered Steel
    Pallares-Santasmartas, Luis
    Albizuri, Joseba
    Aviles, Alexander
    Aviles, Rafael
    METALS, 2018, 8 (04):
  • [23] The effect of mean axial and torsional stresses on the fatigue strength of 34CrNiMo6 high strength steel
    Pallares-Santasmartas, Luis
    Albizuri, Joseba
    Leguinagoicoa, Nelson
    Saintier, Nicolas
    Merzeau, Jonathan
    ICMFF12 - 12TH INTERNATIONAL CONFERENCE ON MULTIAXIAL FATIGUE AND FRACTURE, 2019, 300
  • [24] Effect of Trace Rare Earth Element Cerium (Ce) on Microstructure and Mechanical Properties of High Strength Marine Engineering Steel
    Dong, Ruifeng
    Zhou, Peiying
    Chen, Jiquan
    Lei, Yuansu
    Yang, Xiong
    Wu, Yanjie
    Guo, Jing
    Cui, Qingling
    CRYSTALS, 2024, 14 (10)
  • [25] Application of unified constitutive model of 34CrNiMo6 alloy steel and microstructure simulation for flexible skew rolling hollow shafts
    Cao, Xiaoqing
    Wang, Baoyu
    Zhou, Jing
    Shen, Jinxia
    JOURNAL OF MANUFACTURING PROCESSES, 2022, 76 (598-610) : 598 - 610
  • [26] Effect of Rare Earth Ce on Microstructure and Properties of Q370qENHY Bridge Steel
    Chen, Yue
    Yang, Jichun
    Liu, Xiangjun
    MATERIALS, 2025, 18 (05)
  • [27] Research of Tribological Properties of 34CrNiMo6 Steel in the Production of a Newly Designed Self-Equalizing Thrust Bearing
    Urban, Marek
    Monkova, Katarina
    METALS, 2020, 10 (01)
  • [28] Effect of rare earth on microstructure and properties of niobiumizing layer on GCr15 steel for pin shaft
    Meng, Lingyao
    Shang, Jian
    Zhang, Mengjiu
    Xie, Aijun
    MATERIALS RESEARCH EXPRESS, 2022, 9 (07)
  • [29] Effect of rare earth elements on microstructure and mechanical properties of bainite/martensite bearing steel
    Li, Zan
    Liu, Peng
    Yang, Chaoyun
    Li, Xing
    Luan, Yikun
    Li, Dianzhong
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 22 : 1546 - 1557
  • [30] Effect of rare earth Ce addition on microstructure and mechanical properties of titanium alloy Ti-6Al-4V
    Xu, Yi
    Liu, Zhou
    Zhu, Xinghua
    Jiang, Zheliang
    Chen, Hui
    Wang, Ning
    MATERIALS LETTERS, 2023, 330