Effect of Rare Earth Ce on the Microstructure and Mechanical Properties of 34CrNiMo6 Steel for Wind Turbine Main Shaft

被引:0
|
作者
Ge, Yanming [1 ]
Wang, Kehong [1 ]
机构
[1] Nanjing Univ Sci & Technol, Sch Mat Sci & Engn, Nanjing 210094, Jiangsu, Peoples R China
基金
中国国家自然科学基金;
关键词
D O I
10.1155/2019/8135253
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The effect of rare earth Ce on mechanical properties is studied by investigating the precipitates evolution during heat treatment of 34CrNiMo6 steel. Five different rare earth Ce contents are carried out with the same holding time 3hours. Then, the mechanical properties of 34CrNiMo6 steel are obtained under steady state conditions and impact conditions, respectively. The strength decreases while the elongation after breakage increases with the rare earth Ce content increasing. The impact absorbing energy at 20 degrees C and -40 degrees C increases with the rare earth Ce content increasing. Based on the experimental results, the recommended rare earth Ce content is 0.05 wt.%. The differences in mechanical properties among the different rare earth Ce contents may be the nucleation rate and growth of precipitates under different conditions. The spherification degree of cementite is more complete with rare earth Ce content, resulting in the decrease of mechanical properties and improvement of ductility.
引用
收藏
页数:9
相关论文
共 50 条
  • [11] Effect of Deposition Thickness on the Microstructure of Laser Solid Forming 34CrNiMo6 Steel
    Peng, Junchao
    Huang, Chunping
    Liu, Fenggang
    Zhang, Bingxian
    Liu, Fencheng
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024, 33 (04) : 1693 - 1703
  • [12] Effect of Deposition Thickness on the Microstructure of Laser Solid Forming 34CrNiMo6 Steel
    Junchao Peng
    Chunping Huang
    Fenggang Liu
    Bingxian Zhang
    Fencheng Liu
    Journal of Materials Engineering and Performance, 2024, 33 : 1693 - 1703
  • [13] Mechanical Properties Optimization Metal Bars and Sheets Made of 34CrNiMo6 Steel
    Dzugan Jan
    Novy Zbysek
    Motycka Petr
    Martinkova Jana
    Martinek Petr
    Journal of Iron and Steel Research(International), 2011, 18 (S1) : 956 - 960
  • [14] Mechanical Properties Optimization Metal Bars and Sheets Made of 34CrNiMo6 Steel
    Jan, Dzugan
    Zbysek, Novy
    Petr, Motycka
    Jana, Martinkova
    Petr, Martinek
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2011, 18 : 956 - 960
  • [15] The heat treatment impact on material properties of 34CrNiMo6 steel
    Janeková M.
    Koštialiková D.
    Dubec A.
    Burget M.
    Pešlová F.
    Manufacturing Technology, 2018, 18 (06): : 912 - 916
  • [16] Effect of Y2O3 on microstructure and mechanical properties of 34CrNiMo6 steel fabricated by laser-directed energy deposition
    Qiu, Cheng
    Liu, Fenggang
    Huang, Chunping
    Liu, Fencheng
    Shu, Zongfu
    You, Qifan
    Zheng, Haizhong
    Wang, Lianbo
    Yu, Dawei
    JOURNAL OF MANUFACTURING PROCESSES, 2024, 119 : 270 - 281
  • [17] IMPROVEMENT OF FATIGUE PROPERTIES OF 34CRNIMO6 STEEL BY CONTROLLED THERMOMECHANICAL TREATMENT
    Dzugan, J.
    Novy, Z.
    Konopik, P.
    Motycka, P.
    METAL 2010: 19TH INTERNATIONAL METALLURGICAL AND MATERIALS CONFERENCE, 2010, : 421 - 426
  • [18] Effects of cooling condition on microstructure and mechanical properties in laser rapid forming of 34CrNiMo6 thin-wall component
    Huang Chunping
    Lin Xin
    Liu Fencheng
    Cao Jun
    Liu Fenggang
    Huang Weidong
    The International Journal of Advanced Manufacturing Technology, 2016, 82 : 1269 - 1279
  • [19] Effects of laser shock peening on the surface integrity and fatigue properties of 34CrNiMo6 steel
    Tang, Zhenrong
    Hou, Zhibao
    Du, Haifeng
    Yao, Zhenqiang
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2025,
  • [20] Effect of line energy density in repairing 34CrNiMo6 steel by electron beam remelting
    Liang, Renyu
    Huang, Chunping
    Liu, Fenggang
    Liu, Fencheng
    Lin, Xin
    JOURNAL OF MANUFACTURING PROCESSES, 2022, 79 : 314 - 325