Thermochemical energy storage at high temperature via redox cycles of Mn and Co oxides: Pure oxides versus mixed ones

被引：142

作者：

Carrillo, Alfonso J. ^{[1
]}

Moya, Javier ^{[1
]}

Bayon, Alicia ^{[1
]}

Jana, Prabhas ^{[1
]}

de la Pena O'Shea, Victor A. ^{[1
]}

Romero, Manuel ^{[1
]}

Gonzalez-Aguilar, Jose ^{[1
]}

Serrano, David P. ^{[1
,2
]}

Pizarro, Patricia ^{[1
,2
]}

Coronado, Juan M. ^{[1
]}

机构：

[1] IMDEA Energy Inst, Madrid 28935, Spain

[2] Rey Juan Carlos Univ, ESCET, Dept Chem & Energy Technol, Madrid 28933, Spain

来源：

SOLAR ENERGY MATERIALS AND SOLAR CELLS | 2014年 / 123卷

关键词：

Thermal energy storage; Thermochemical energy storage; Concentrated solar power; Redox cycles; Metal oxides; ELECTRICAL-PROPERTIES; THERMAL-BEHAVIOR; MANGANESE OXIDE; COBALT; POWER;

D O I：

10.1016/j.solmat.2013.12.018

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

Development of thermal energy storage (TES) systems for concentrated solar power (CSP) is essential in order to match a variable electricity demand with an intermittent energy source supply, enhancing energy generation dispatchability. The high energy storage densities and the possibility of working at higher temperature ranges make thermochemical heat storage (TCS) via reduction-oxidation (redox) cycles of metal oxides a promising concept for energy storage. For this purpose, manganese and cobalt oxides have been selected as feasible candidates due to their favourable thermodynamic properties. In order to explore the potential of these materials, the capacity of both pure (Mn2O3 and Co3O4) and mixed oxides (Mn3-xCoxO4) to withstand several charge-discharge cycles was evaluated by thermogravimetrical analysis. Results showed better cyclability for the mixed oxides with low Mn content (x >= 2.94) and, specially, for the corresponding pure oxides, confirming that these materials may be a viable option for TCS. (C) 2013 Elsevier B.V. All rights reserved.

引用

页码：47 / 57

页数：11

共 33 条

[1] Assessment of a closed thermochemical energy storage using energy and exergy methods [J].