Chemical modification of SBS star block copolymer for templating nanostructures in epoxy resin blends

被引:4
作者
Pandit, R. [1 ,2 ]
Lach, R. [3 ,4 ]
Grellmann, W. [3 ,4 ]
Michler, G. H. [4 ,5 ]
Henning, S. [4 ,6 ]
Saiter, J. M. [7 ,8 ]
Berkessel, A. [9 ]
Adhikari, R. [2 ,10 ]
机构
[1] Tribhuvan Univ, Dept Chem, Trichandra Multiple Campus, Kathmandu, Nepal
[2] Nepal Polymer Inst NPI, POB 24411, Kathmandu, Nepal
[3] Polymer Serv GmbH Merseburg PSM, Eberhard Leibnitz Str 2, D-06217 Merseburg, Germany
[4] Inst Polymerwerkstoffe eV IPW, Eberhard Leibnitz Str 2, D-06217 Merseburg, Germany
[5] Martin Luther Univ Halle Wittenberg, Inst Phys, Weinberg 2, D-06120 Halle, Germany
[6] Fraunhofer Inst Microstruct Mat & Syst IMWS, Walter Hulse Str 2, D-06120 Halle, Germany
[7] SMS Univ Normandie Rouen, Ave Univ BP 12, F-76801 St Etienne Du Rouvray, France
[8] Onyx Grp Nutriset, Malaunay, France
[9] Univ Cologne, Dept Chem, Greinstr 4, D-50939 Cologne, Germany
[10] Tribhuvan Univ, Res Ctr Appl Sci & Technol RECAST, Kathmandu, Nepal
关键词
Epoxy resin; Block copolymer; Nanostructures; FTIR spectroscopy; Electron microscopy; Epoxidation; MICROPHASE SEPARATION; THERMOSETTING SYSTEMS; MECHANICAL-PROPERTIES; TRIBLOCK COPOLYMER; EPOXIDATION; MORPHOLOGY; BEHAVIOR; MISCIBILITY; KINETICS; MATRIX;
D O I
10.1016/j.matpr.2020.05.398
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Star-shaped polystyrene-block-polybutadiene-block-polystyrene (SBS) block copolymer (BCP) was subjected to epoxidation reaction using m-chloroperoxy benzoic acid (MCPBA). The epoxidized SBS block copolymer (eSBS) was then blended with diglycidyl ether of bisphenol-A based epoxy resin (EP) and cross-linked with methylene dianiline (MDA). The materials were characterized by different techniques such as Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). The FTIR spectrumwith the peak located at 890 cm(-1) and 1230 cm(-1) attested the occurrence of epoxidation reaction. The nanophase separated structures as demonstrated by transmission electron microscopy were induced in the eSBS/EP blends by epoxidized eSBS. (C) 2020 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1156 / 1160
页数:5
相关论文
共 44 条
  • [1] Influence of molecular architecture on morphology and micromechanical behavior of styrene/butadiene block copolymer systems
    Adhikari, R
    Michler, GH
    [J]. PROGRESS IN POLYMER SCIENCE, 2004, 29 (09) : 949 - 986
  • [2] [Anonymous], 1997, POLYMER
  • [3] [Anonymous], 2008, J MACROMOL SCI B, DOI DOI 10.1080/00222340801955032
  • [4] [Anonymous], 1993, J APPL POLYM SCI
  • [5] [Anonymous], 2019, MACROMOLECULES, DOI DOI 10.1021/ACS.MACROMOL.8B02061
  • [6] [Anonymous], 2012, NEPAL J SCI TECHNOL
  • [7] [Anonymous], 2010, J WUHAN UNIV TECHNOL, DOI DOI 10.1007/S11595-010-0011-5
  • [8] [Anonymous], 1996, J POLYM SCI POL CHEM
  • [9] [Anonymous], 2019, POLYMER, DOI DOI 10.1016/J.POLYMER.2019.05.024
  • [10] [Anonymous], 2017, MATER TODAY PROC E