The corrosion behavior of 304L and 316L stainless steel in food grade phosphoric acid solutions

被引：6
|
作者：
Li Yanli [1 ]
Xiang Song [1 ,2 ]
Zeng Hongtao [1 ]
Wang Jiangping [2 ]
Wang Quanding [2 ]
机构：
[1] Guizhou Univ, Sch Met & Mat, Guiyang 550003, Peoples R China
[2] Wengfu Grp Co Ltd, Fuquan 55051, Peoples R China
来源：
EMERGING SYSTEMS FOR MATERIALS, MECHANICS AND MANUFACTURING | 2012年 / 109卷
关键词：
stainless steel; corrosion morphology; polarization curves;
D O I：
10.4028/www.scientific.net/AMM.109.28
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The corrosion behavior of 304L and 316L stainless steel have been investigated in 55 degrees C,85% food grade phosphoric acid solution by weight loss method and dynamic potential scan, the surface morphology was observed by scanning electron microscopy(SEM). The results showed that the number of pits in 304L was much more than that in 316L. The contents of Cr inside pits were greater than that in the smooth surface in the two stainless steels, indicating the Cr-poor are prone to corrosion. All the samples exhibited stable passive behavior which can be seen from the potentiodynamic polarization curves, 316L corrosion potential (-0.201V) was higher than that of 304L the corrosion potential (-0.357V), and under the same circumstance, 316L stainless steel was more corrosion-resistant than 304L stainless steel.
引用
收藏
页码：28 / +
页数：2
相关论文
共 50 条
  • [1] Tribo-Behavior and Corrosion Properties of Welded 304L and 316L Stainless Steel
    Abdo, Hany S.
    Seikh, Asiful H.
    Alharbi, Hamad F.
    Mohammed, Jabair Ali
    Soliman, Mahmoud S.
    Fouly, Ahmed
    Ragab, Sameh A.
    COATINGS, 2021, 11 (12)
  • [2] On the cyclic behavior of 304L and 316L stainless steels
    Taleb, Lakhdar
    ADVANCES IN ENGINEERING PLASTICITY XI, 2013, 535-536 : 201 - 204
  • [3] Considerations for the weldability of types 304L and 316L stainless steel
    Korinko P.S.
    Malene S.H.
    Practical Failure Analysis, 2001, 1 (4) : 61 - 68
  • [4] Corrosion behaviour of aisi 304L and 316L stainless steels prepared by powder metallurgy in the presence of sulphuric and phosphoric acid
    Otero, E
    Pardo, A
    Utrilla, MV
    Saenz, E
    Alvarez, JF
    CORROSION SCIENCE, 1998, 40 (08) : 1421 - 1434
  • [5] Nitriding behavior and corrosion properties of AISI 304L and 316L austenitic stainless steel with deformation-induced martensite
    Biehler, J.
    Hoche, H.
    Oechsner, M.
    SURFACE & COATINGS TECHNOLOGY, 2017, 324 : 121 - 128
  • [6] Effect of Nitrate and Sulfate on Atmospheric Corrosion of 304L and 316L Stainless Steels
    Cook, Angus J. M. C.
    Padovani, Cristiano
    Davenport, Alison J.
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2017, 164 (04) : C148 - C163
  • [7] Corrosion Behaviour of 316L Stainless Steel in Boric Acid Solutions
    Zhang, Shenghan
    Lu, Quan
    Xu, Yunfei
    He, Kuan
    Bang, Kexin
    Tan, Yu
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2018, 13 (04): : 3246 - 3256
  • [8] Influence of the microstructure on the corrosion resistance of plasma-nitrided austenitic stainless steel 304L and 316L
    Biehler, J.
    Hoche, H.
    Oechsner, M.
    Kaestner, P.
    Bunk, K.
    Braeuer, G.
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2014, 45 (10) : 930 - 946
  • [9] Mechanical properties of Austenitic Stainless Steel 304L and 316L at elevated temperatures
    Desu, Raghuram Karthik
    Krishnamurthy, Hansoge Nitin
    Balu, Aditya
    Gupta, Amit Kumar
    Singh, Swadesh Kumar
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2016, 5 (01): : 13 - 20
  • [10] IASCC susceptibility of type 304, 304L and 316L stainless steels
    Tanaka, Y
    Suzuki, S
    Fukuya, K
    Sakamoto, H
    Kodama, M
    Nishimura, S
    Nakata, K
    Kato, T
    PROCEEDINGS OF THE EIGHTH INTERNATIONAL SYMPOSIUM ON ENVIRONMENTAL DEGRADATION OF MATERIALS IN NUCLEAR POWER SYSTEMS - WATER REACTORS, VOLS 1 AND 2, 1997, : 803 - 811
12345