Effect of Ni addition on pressureless sintering of tungsten diboride

被引：14
作者：
Cao, Xiaozhou [1 ,2 ]
Wang, Chao [1 ]
Shi, Lihan [3 ]
Yang, He [1 ,2 ]
Xue, Xianxin [1 ,2 ]
Li, Haitao [4 ]
机构：
[1] Northeastern Univ, Sch Met & Mat, Shenyang 110819, Peoples R China
[2] Key Lab Recycling Sci Met Resource, Shenyang 110819, Liaoning Provin, Peoples R China
[3] Shanghai Leading Met Technol Co Ltd, Shanghai, Peoples R China
[4] Shenyang Aircraft Design & Res Inst, Shenyang 110015, Peoples R China
来源：
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS | 2013年 / 41卷
基金：
中国国家自然科学基金;
关键词：
WB2; Nickel addition; Microstructure; Mechanical property; Pressureless sintering; TIB2-WB2; SOLID-SOLUTIONS; ACTIVATED COMBUSTION SYNTHESIS; PHASE-DECOMPOSITION; SIMULTANEOUS DENSIFICATION; MECHANICAL-PROPERTIES; POROSITY; MICROSTRUCTURE; TEMPERATURE; CERAMICS; TIME;
D O I：
10.1016/j.ijrmhm.2013.07.013
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
WB2 ceramic was prepared by a two-step-sintering method. First, phase-pure WB2 powder was successfully synthesised by solid-state reaction using tungsten and boron powder with a molar ratio of 1:2.5. The mixed powders were treated by pressureless high-temperature synthesis (1500 degrees C, 1 h, in vacuum). Second, WB2 powder with Ni was used as a sintering aid (1500 degrees C, 1 h, in vacuum), and the influence of the content of sintering aids on the density, porosity, phase and microstructure was studied. The relationship between Vickers micro-hardness, flexural strength and microstructure was also investigated. The result showed that the properties of the WB2 ceramic can be optimised by adjusting the content of sintering aids. The best performance of the WB2 ceramic is obtained using a sintering aid content of 5 wt.%; the relative density, porosity, Vickers micro-hardness and flexural strength of the sintered sample can reach 91.80%, 3.30%, 2623 MPa and 170 MPa, respectively. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码：597 / 602
页数：6
相关论文
共 24 条
  • [1] Cech B., 1965, POWDER METALL, V8, P142
  • [2] Electronic and structural origin of ultraincompressibility of 5d transition-metal diborides MB2 (M=W, re, os)
    Chen, Xing-Qiu
    Fu, C. L.
    Krcmar, M.
    Painter, G. S.
    [J]. PHYSICAL REVIEW LETTERS, 2008, 100 (19)
  • [3] EFFECT OF POROSITY ON PHYSICAL PROPERTIES OF SINTERED ALUMINA
    COBLE, RL
    KINGERY, WD
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1956, 39 (11) : 377 - 385
  • [4] Duschanek H., 1995, PHASE EQUILIB, V16, P50
  • [5] Transition Metal Borides: Superhard versus Ultra-incompressihle
    Gu, Qinfen
    Krauss, Guenter
    Steurer, Walter
    [J]. ADVANCED MATERIALS, 2008, 20 (19) : 3620 - +
  • [6] Multi-scale wear of a boride coating on tungsten
    Ingole, S
    Liang, H
    Usta, M
    Bindal, C
    Ucisik, AH
    [J]. WEAR, 2005, 259 : 849 - 860
  • [7] Synthesis of hard materials by field activation:: The synthesis of solid solutions and composites in the TiB2-WB2-CrB2 system
    Kaga, H
    Heian, EM
    Munir, ZA
    Schmalzried, C
    Telle, R
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2001, 84 (12) : 2764 - 2770
  • [8] Structure analysis of the WB2(0001) surface
    Kawanowa, H
    Gotoh, Y
    Otani, S
    Souda, R
    [J]. SURFACE SCIENCE, 1999, 433 : 661 - 665
  • [9] Formation of hard tungsten boride layer by spark plasma sintering boriding
    Khor, KA
    Yu, LG
    Sundararajan, G
    [J]. THIN SOLID FILMS, 2005, 478 (1-2) : 232 - 237
  • [10] Kislyi PS., 1966, SOV POWDER METALL ME, V5, P360
123