In situ microscopic study of tribology and growth of ZDDP antiwear tribofilms on an Al-Si alloy

被引:16
作者
Mittal, Prashant [1 ]
Maithani, Yogita [2 ]
Singh, Jitendra Pratap [2 ]
Gosvami, Nitya Nand [1 ]
机构
[1] Indian Inst Technol Delhi, Dept Mat Sci & Engn, New Delhi 110016, India
[2] Indian Inst Technol Delhi, Dept Phys, New Delhi 110016, India
关键词
ZDDP; Antiwear tribofilm; Lubricant additive; Atomic force microscopy; SILICON ALLOY; WEAR; MECHANISMS; FRICTION; FILMS; PHASES;
D O I
10.1016/j.triboint.2020.106419
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Zincdialkyldithiophosphates (ZDDPs) form protective antiwear tribofilms but the growth mechanism and their contribution to friction on non-ferrous alloys are not well understood. Using a recently developed in situ AFM technique, we monitor the growth of ZDDP based tribofilms, friction, and wear, over Al matrix and Si phase of ADC12, sliding against a nonferrous alumina probe. Sliding tests performed at elevated temperature (110 degrees C), simultaneously over Al and Si phase, reveal tribofilm growth on both Al and Si regions without noticeable wear. However, the tribofilm thickness, density, and coefficient of friction on the Si phase are higher than on the Al matrix. Significant wear and increase in the coefficient of friction was observed when sliding within the Al matrix region alone.
引用
收藏
页数:7
相关论文
共 50 条
  • [41] Effect of trace elements on the pinhole fatigue-resistance of gasoline Al-Si piston alloy
    Tang Wei-chen
    Piao Zhong-yu
    Zhang Jian
    Liu Shi-ying
    Deng Li-jun
    ENGINEERING FAILURE ANALYSIS, 2020, 108
  • [42] Effect of load on the tribological properties of hypereutectic Al-Si alloy under boundary lubrication conditions
    Kumar, Parveen
    Wani, M. F.
    MATERIALS RESEARCH EXPRESS, 2017, 4 (11):
  • [43] A Comparative Investigation on Tribological Properties of Al-Si Alloy based MMC Reinforced with Waste Materials
    Dash, Debashish
    Sahu, Sandeep Kumar
    Senapati, Ajit Kumar
    1ST INTERNATIONAL CONFERENCE ON ADVANCED ENGINEERING FUNCTIONAL MATERIALS (ICAEFM), 2018, 410
  • [44] Anti-wear behaviour of silver nanoparticles on Al-Si alloy
    Akgul, Yasin
    Simsir, Hamza
    SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 2021, 9 (02)
  • [45] Tribological properties of A356 Al-Si alloy composites under dry sliding conditions
    Vencl, Aleksandar
    Bobic, Ilija
    Stojanovic, Blaza
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2014, 66 (01) : 66 - 74
  • [46] Wear resistance of plasma sprayed Al-Si binary alloy coatings on A6063 Al alloy substrate
    Nakata, K
    Ushio, M
    SURFACE & COATINGS TECHNOLOGY, 2001, 142 : 277 - 282
  • [47] Microstructural and Tribological Properties of A356 Al-Si Alloy Reinforced with Al2O3 Particles
    Vencl, Aleksandar
    Bobic, Ilija
    Jovanovic, Milian T.
    Babic, Miroslav
    Mitovic, Slobodan
    TRIBOLOGY LETTERS, 2008, 32 (03) : 159 - 170
  • [48] Study of Al-Si alloys grain refinement by inoculation
    Sunitha, K.
    Gurusami, K.
    MATERIALS TODAY-PROCEEDINGS, 2021, 43 : 1825 - 1829
  • [49] A Study on the Tribofilm Growth and Tribological Properties of Tribofilms Formed from Zinc Dialkyl Dithiophosphate (ZDDP) and Molybdenum Dialkyl Dithiocarbamate (MoDTC)
    Lu, Renguo
    Shiode, Sora
    Tani, Hiroshi
    Tagawa, Norio
    Koganezawa, Shinji
    TRIBOLOGY ONLINE, 2018, 13 (03): : 157 - 165
  • [50] A novel Al-Ti-B alloy for grain refining Al-Si foundry alloys
    Birol, Yucel
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 486 (1-2) : 219 - 222