Flexural strengthening of damaged RC T-beams using self-compacting concrete jacketing under different sustaining load

被引:29
作者
Zhang, Xuhui [1 ,2 ]
Luo, Yuming [2 ]
Wang, Lei [2 ]
Zhang, Jianren [2 ]
Wu, Wenpeng [1 ]
Yang, Caiqian [1 ]
机构
[1] Xiangtan Univ, Coll Civil Engn & Mech, Xiangtan 411105, Peoples R China
[2] Changsha Univ Sci & Technol, Sch Civil Engn & Architecture, Changsha 410114, Hunan, Peoples R China
基金
中国国家自然科学基金; 中国博士后科学基金;
关键词
Bridge engineering; Self-compacting concrete; RC beam; Strengthening; Sustaining load; Flexural behavior; BOND STRENGTH; BEHAVIOR; PERFORMANCE; PLATES; VIBRATION;
D O I
10.1016/j.conbuildmat.2018.03.245
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
An experimental test is proposed in the present study to investigate the flexural behavior of damaged reinforced concrete (RC) beams strengthened by self-compacting concrete jacketing under different sustaining load. Eight RC T-beams with primary damages are designed and strengthened under different sustaining load. Then, the flexural testing test is employed to investigate the structural behavior of the strengthened beams. The influences of the sustaining load on beam response are clarified. The prediction method for the flexural capacity of the strengthened beams is also discussed. Results shows that the strengthening method proposed in the present study improves effectively the flexural behavior of beams, both in the stiffness after concrete cracking and the flexural capacity of the beams. Especially the flexural capacity, which becomes about twice as great. The interface treatment by surface roughening and rebar planting can provide effective bond strength between the substrate-new concrete. Sustaining load increase slightly the stiffness and the flexural capacity of beams until exceeding a critical value. The critical load was about 30% of the yield moment of beam before strengthening in the present test. The prediction of flexural capacity had high accuracy by the plastic limit analysis method and neglecting the strain-lag effects caused by the sustaining load during the strengthening process. (C) 2018 Elsevier Ltd. All rights reserved.
引用
收藏
页码:185 / 195
页数:11
相关论文
共 48 条
[1]   An efficient hyperbolic shear deformation theory for bending, buckling and free vibration of FGM sandwich plates with various boundary conditions [J].
Abdelaziz, Hadj Henni ;
Meziane, Mohamed Ait Amar ;
Bousahla, Abdelmoumen Anis ;
Tounsi, Abdelouahed ;
Mahmoud, S. R. ;
Alwabli, Afaf S. .
STEEL AND COMPOSITE STRUCTURES, 2017, 25 (06) :693-704
[2]   Strengthening of concrete beams by monolayer prepreg composites with and without graphene reinforcement [J].
Acar, Volkan ;
Cakir, Ferit ;
Uysal, Habib ;
Seydibeyoglu, M. Ozgur ;
Akbulut, Hamit ;
Mosalam, Khalid M. .
CONSTRUCTION AND BUILDING MATERIALS, 2017, 151 :866-880
[3]   Exploitation of Ultrahigh-Performance Fibre-Reinforced Concrete for the Strengthening of Concrete Structural Members [J].
Al-Osta, Mohammed A. .
ADVANCES IN CIVIL ENGINEERING, 2018, 2018
[4]   Strength and Behavior of Circular FRP-Reinforced Concrete Sections without Web Reinforcement in Shear [J].
Ali, Ahmed H. ;
Mohamed, Hamdy M. ;
Benmokrane, Brahim .
JOURNAL OF STRUCTURAL ENGINEERING, 2017, 143 (03)
[5]  
[Anonymous], 2013, J ENG-NY
[6]   Bending and free vibration analysis of functionally graded plates using a simple shear deformation theory and the concept the neutral surface position [J].
Bellifa, Hichem ;
Benrahou, Kouider Halim ;
Hadji, L. ;
Houari, Mohammed Sid Ahmed ;
Tounsi, Abdelouahed .
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2016, 38 (01) :265-275
[7]  
Bouderba B, 2013, STEEL COMPOS STRUCT, V14, P85
[8]   Effects of granulated blast furnace slag and superplasticizer type on the fresh properties and compressive strength of self-compacting concrete [J].
Boukendakdji, Othmane ;
Kadri, El-Hadj ;
Kenai, Said .
CEMENT & CONCRETE COMPOSITES, 2012, 34 (04) :583-590
[9]   On thermal stability of plates with functionally graded coefficient of thermal expansion [J].
Bousahla, Abdelmoumen Anis ;
Benyoucef, Samir ;
Tounsi, Abdelouahed ;
Mahmoud, S. R. .
STRUCTURAL ENGINEERING AND MECHANICS, 2016, 60 (02) :313-335