Corrosion properties of a complex multi-phase martensitic stainless steel depending on the tempering temperature

被引：18
|
作者：
Seifert, M. [1 ]
Wieskaemper, D. [1 ]
Tonfeld, T. [1 ]
Huth, S. [1 ]
机构：
[1] Ruhr Univ Bochum, Chair Mat Technol, D-44780 Bochum, Germany
来源：
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION | 2015年 / 66卷 / 11期
关键词：
HIGH-SPEED STEELS; HEAT-TREATMENT; ANODIC POLARIZATION; RESISTANCE; CEMENTITE; PASSIVITY; CHROMIUM; BEHAVIOR; ALLOYS; METALS;
D O I：
10.1002/maco.201508229
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this work, the corrosion resistance of X190CrVMo20-4-1 martensitic stainless steel and the hardness are correlated with the tempering temperature. The steel was hardened from a typical austenitisation temperature, quenched in oil and tempered up to 600 degrees C. The corrosion resistance was investigated by means of electrochemical tests, in both 5% sulphuric acid and in 3% sodium chloride. Static immersion tests were performed in H2SO4 only. The best compromise for a high hardness and corrosion resistance is found for tempering between 100 and 200 degrees C. The data obtained can be used for designing and application of this steel.
引用
收藏
页码：1290 / 1298
页数：9
相关论文
共 50 条
  • [31] Beneficial effect of reversed austenite on the intergranular corrosion resistance of martensitic stainless steel
    Man, Cheng
    Dong, Chaofang
    Kong, Decheng
    Wang, Li
    Li, Xiaogang
    CORROSION SCIENCE, 2019, 151 : 108 - 121
  • [32] Model of liquid gallium corrosion with austenitic stainless steel at a high temperature
    Shin, Sang Hun
    Kim, Seung Hyun
    Kim, Ji Hyun
    JOURNAL OF NUCLEAR MATERIALS, 2014, 450 (1-3) : 314 - 321
  • [33] Corrosion behavior of nitrogen alloyed martensitic stainless steel in chloride containing solutions
    Qi, Xing
    Mao, Honghuan
    Yang, Yitao
    CORROSION SCIENCE, 2017, 120 : 90 - 98
  • [34] Effect of tempering temperature on monotonic and low-cycle fatigue properties of a new low-carbon martensitic steel
    Yang, G.
    Xia, S. L.
    Zhang, F. C.
    Branco, R.
    Long, X. Y.
    Li, Y. G.
    Li, J. H.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 826
  • [35] Effect of Tempering Temperature on Hydrogen Embrittlement of SCM440 Tempered Martensitic Steel
    Kim, Sang-Gyu
    Kim, Jae-Yun
    Hwang, Byoungchul
    MATERIALS, 2023, 16 (16)
  • [36] Electrochemical corrosion behavior of martensitic stainless steel in an oilfield environment
    Liang, Yan
    Hu, Jiahao
    Lou, Chaohang
    Zhang, Tao
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2024, 19 (12):
  • [37] Effect of austenitization temperature on microstructure, crystallographic aspects, and mechanical properties of AISI 420 martensitic stainless steel
    de Moura, Ariane Neves
    Favarato, Luciana Nascimento Oliveira
    Amorim, Dirceni de Souza Costa
    Alcantara, Claudio Moreira de
    Marques, Murilo Carmelo Satolo
    Orlando, Marcos Tadeu D. 'Azeredo
    Vieira, Estefano Aparecido
    Labiapari, Wilian da Silva
    da Cunha, Marco Antonio
    de Oliveira, Tarcisio Reis
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 909
  • [38] Toughness Improvement in a Novel Martensitic Stainless Steel Achieved by Quenching-Tempering and Partitioning
    Deng, B.
    Hou, Z. Y.
    Wang, G. D.
    Yi, H. L.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2021, 52 (11): : 4852 - 4864
  • [39] Effect of Preheat Temperature on Weldability of Martensitic Stainless Steel
    Kumar, Sanjeev
    Chaudhari, G. P.
    Nath, S. K.
    Basu, B.
    MATERIALS AND MANUFACTURING PROCESSES, 2012, 27 (12) : 1382 - 1386
  • [40] Mechanical and corrosion resistant properties of martensitic stainless steel plasma nitrocarburized with rare earths addition
    Liu Ruiliang
    Qiao Yingjie
    Yan Mufu
    Fu Yudong
    JOURNAL OF RARE EARTHS, 2012, 30 (08) : 826 - 830
12345