Corrosion properties of a complex multi-phase martensitic stainless steel depending on the tempering temperature

被引：18
|
作者：
Seifert, M. [1 ]
Wieskaemper, D. [1 ]
Tonfeld, T. [1 ]
Huth, S. [1 ]
机构：
[1] Ruhr Univ Bochum, Chair Mat Technol, D-44780 Bochum, Germany
来源：
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION | 2015年 / 66卷 / 11期
关键词：
HIGH-SPEED STEELS; HEAT-TREATMENT; ANODIC POLARIZATION; RESISTANCE; CEMENTITE; PASSIVITY; CHROMIUM; BEHAVIOR; ALLOYS; METALS;
D O I：
10.1002/maco.201508229
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this work, the corrosion resistance of X190CrVMo20-4-1 martensitic stainless steel and the hardness are correlated with the tempering temperature. The steel was hardened from a typical austenitisation temperature, quenched in oil and tempered up to 600 degrees C. The corrosion resistance was investigated by means of electrochemical tests, in both 5% sulphuric acid and in 3% sodium chloride. Static immersion tests were performed in H2SO4 only. The best compromise for a high hardness and corrosion resistance is found for tempering between 100 and 200 degrees C. The data obtained can be used for designing and application of this steel.
引用
收藏
页码：1290 / 1298
页数：9
相关论文
共 50 条
  • [21] Effect of Ce on the High Temperature Mechanical Properties of Martensitic Stainless Steel
    Liu, Xiao
    Li, Jianshe
    MATERIALS PROCESSING TECHNOLOGY II, PTS 1-4, 2012, 538-541 : 1601 - +
  • [22] Tuning the pitting performance of a Cr-13 type martensitic stainless steel by tempering time
    Yuan, Feng
    Wei, Gaoyang
    Gao, Shurui
    Lu, Siyuan
    Liu, Hengsan
    Li, Shuxin
    Fang, Xufei
    Chen, Yunbo
    CORROSION SCIENCE, 2022, 203
  • [23] Influence of tempering temperature on the fretting wear of low alloyed martensitic construction steel
    Tang, Qibing
    Wei, Xuejiao
    Li, Hao
    Qiu, Xinyue
    Xu, Xiaojun
    Gou, Guoqing
    Xu, Wei
    Zhu, Minhao
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2020, 34 (18):
  • [24] Corrosion resistance improvement in 6Cr13 martensitic stainless steel via quenching-tempering and partitioning
    Song, Xin
    Hu, Yong
    Yan, Zhijie
    Qi, Huiping
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2023, 74 (04): : 544 - 550
  • [25] Effect of tempering temperature and microstructure on the corrosion behavior of a tempered steel
    Atapek, S. Hakan
    Polat, Seyda
    Zor, Sibel
    PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES, 2013, 49 (02) : 240 - 246
  • [26] Effect of Tempering Temperature on Carbide Precipitation and Mechanical Properties of Marine Atmospheric Corrosion Resistant Steel
    Bao, Y. K.
    Wu, M.
    Liu, K. X.
    Feng, Y. Y.
    Zhao, X. M.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2022, 31 (03) : 2517 - 2524
  • [27] Effect of hydrostatic pressure on the pitting corrosion of 17-4PH martensitic stainless steel
    Ma, Hongyu
    Liu, Rui
    Ke, Peiling
    Cui, Yu
    Liu, Li
    Wang, Fuhui
    ENGINEERING FAILURE ANALYSIS, 2022, 138
  • [28] Characterization of the mechanical properties and microstructural evolution of martensitic steel in repeated tempering cycles
    Shelar, Amitkumar
    Ronge, B. P.
    FRATTURA ED INTEGRITA STRUTTURALE-FRACTURE AND STRUCTURAL INTEGRITY, 2023, 17 (66): : 38 - 55
  • [29] On microstructure, crystallographic orientation, and corrosion properties of wire arc additive manufactured 420 martensitic stainless steel: Effect of the inter-layer temperature
    Salahi, Salar
    Nemani, Alireza Vahedi
    Ghaffari, Mahya
    Lunde, Jonas
    Nasiri, Ali
    ADDITIVE MANUFACTURING, 2021, 46
  • [30] Microstructural evolution during tempering and intrinsic strengthening mechanisms in a low carbon martensitic stainless bearing steel
    Zeng, T. Y.
    Li, W.
    Wang, N. M.
    Wang, W.
    Yang, K.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 836
12345