Corrosion properties of a complex multi-phase martensitic stainless steel depending on the tempering temperature

被引：18
|
作者：
Seifert, M. [1 ]
Wieskaemper, D. [1 ]
Tonfeld, T. [1 ]
Huth, S. [1 ]
机构：
[1] Ruhr Univ Bochum, Chair Mat Technol, D-44780 Bochum, Germany
来源：
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION | 2015年 / 66卷 / 11期
关键词：
HIGH-SPEED STEELS; HEAT-TREATMENT; ANODIC POLARIZATION; RESISTANCE; CEMENTITE; PASSIVITY; CHROMIUM; BEHAVIOR; ALLOYS; METALS;
D O I：
10.1002/maco.201508229
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this work, the corrosion resistance of X190CrVMo20-4-1 martensitic stainless steel and the hardness are correlated with the tempering temperature. The steel was hardened from a typical austenitisation temperature, quenched in oil and tempered up to 600 degrees C. The corrosion resistance was investigated by means of electrochemical tests, in both 5% sulphuric acid and in 3% sodium chloride. Static immersion tests were performed in H2SO4 only. The best compromise for a high hardness and corrosion resistance is found for tempering between 100 and 200 degrees C. The data obtained can be used for designing and application of this steel.
引用
收藏
页码：1290 / 1298
页数：9
相关论文
共 50 条
  • [1] Rapid Tempering of Martensitic Stainless Steel AISI420: Microstructure, Mechanical and Corrosion Properties
    Abbasi-Khazaei, Bijan
    Mollaahmadi, Akbar
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2017, 26 (04) : 1626 - 1633
  • [2] Effect of Tempering Time on the Microstructure and Properties of Martensitic Stainless Steel
    Jiang, Wei
    Wu, Dong
    Zhang, Qinyi
    Li, Mingxuan
    Liu, Wei
    METALS, 2024, 14 (03)
  • [3] Effect of tempering temperature on the microstructure, corrosion resistance, and antibacterial properties of Cu-bearing martensitic stainless steel
    Hao, Xinxin
    Xi, Tong
    Xu, Zhiqiang
    Liu, Lichu
    Yang, Chunguang
    Yang, Ke
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2021, 72 (10): : 1668 - 1676
  • [4] Effect of Tempering Treatments on Microstructure and Intergranular Corrosion of 13 wt% Cr Martensitic Stainless Steel
    Kumar, B. Sunil
    Kain, Vivekanand
    Vishwanadh, B.
    CORROSION, 2017, 73 (04) : 362 - 378
  • [5] Achieving a superior combination of tensile properties and corrosion resistance in AISI420 martensitic stainless steel by low-temperature tempering
    Gao, Bo
    Xu, Tao
    Wang, Li
    Liu, Yi
    Liu, Junliang
    Zhang, Yaping
    Sui, Yudong
    Sun, Wenwen
    Chen, Xuefei
    Li, Xiaofeng
    Xiao, Lirong
    Zhou, Hao
    CORROSION SCIENCE, 2023, 225
  • [6] The effect of tempering temperature on the microstructure and electrochemical properties of a 13 wt.% Cr-type martensitic stainless steel
    Lu, Si-Yuan
    Yao, Ke-Fu
    Chen, Yun-Bo
    Wang, Miao-Hui
    Liu, Xue
    Ge, Xueyuan
    ELECTROCHIMICA ACTA, 2015, 165 : 45 - 55
  • [7] Effect of the Tempering Process on the Corrosion Performance of Wire Arc Additively Manufactured 420 Martensitic Stainless Steel
    Lunde, Jonas
    Salahi, Salar
    Nemani, Alireza Vahedi
    Ghaffari, Mahya
    Nasiri, Ali
    CORROSION, 2022, 78 (09) : 850 - 864
  • [8] Influence of tempering treatment on microstructure and pitting corrosion of 13 wt.% Cr martensitic stainless steel
    Bonagani, Sunil Kumar
    Bathula, Vishwanadh
    Kain, Vivekanand
    CORROSION SCIENCE, 2018, 131 : 340 - 354
  • [9] Effect of High Temperature Tempering on The Mechanical Properties and Microstructure of The Modified 410 Martensitic Stainless Steel
    Mabruri, Efendi
    Pasaribu, Rahmat Ramadhan
    Sugandi, Moh. Tri
    Sunardi
    METALLURGY AND ADVANCED MATERIAL TECHNOLOGY FOR SUSTAINABLE DEVELOPMENT, 2018, 1964
  • [10] TAILORING OF MECHANICAL PROPERTIES OF AISI 410 MARTENSITIC STAINLESS STEEL THROUGH TEMPERING
    Godbole, Kirtiratan
    Panigrahi, Bharat B.
    Das, Chittaranjan
    METAL 2017: 26TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2017, : 705 - 710
12345