Influence of PBO fibers heat-treatment on physical-chemical properties and surface

被引：1

作者：

Zhao, Lei ^{[1
]}

Song, Yuan Jun ^{[1
]}

Wu, J. J. ^{[1
]}

Shi, D. ^{[2
]}

Zhu, L. Y. ^{[2
]}

Huang, Y. D. ^{[1
]}

机构：

[1] Harbin Inst Technol, Sch Chem Engn & Technol, State Key Lab Urban Water Resource & Environm, Harbin 150001, Peoples R China

[2] Harbin Univ Sci & Technol, Harbin 150040, Peoples R China

来源：

RENEWABLE AND SUSTAINABLE ENERGY II, PTS 1-4 | 2012年 / 512-515卷

基金：

中国国家自然科学基金;

关键词：

PBO fibers; Heat treatment; Tensile strength; Surface;

D O I：

10.4028/www.scientific.net/AMR.512-515.2076

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

The influence of heat-treatment in nitrogen atmosphere at different temperatures, time and stress on the physical-chemical properties and the surface of PBO fibers were investigated through Single fiber tensile, TG and SEM analysis. The results show that the tensile strength of PBO fibers dose not change so much before 600 degrees C, but for heat-treatment at 650 degrees C, there is a significant decrease in strength. Heat-treatment also makes the surface of fibers rougher than untreated fibers.

引用

页码：2076 / +

页数：2

共 8 条

[1] Plasma surface treatment and modification of glass fibers [J].

Cech, V ;

Prikryl, R ;

Balkova, R ;

Grycova, A ;

Vanek, J .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2002, 33 (10) :1367-1372

[2] Rigid-rod polymeric fibers [J].

Chae, HG ;

Kumar, S .

JOURNAL OF APPLIED POLYMER SCIENCE, 2006, 100 (01) :791-802

[3]

Chong R. P., 1996, J KOR FIBER SOC, V33, P997

[4] Changes in physico-chemical and morphological properties of carbon fiber by surface treatment [J].

Lee, JS ;

Kang, TJ .

CARBON, 1997, 35 (02) :209-216

[5] Modification of polymer blend properties by argon plasma/electron beam treatment: surface properties [J].

Pascu, M ;

Vasile, C ;

Gheorghiu, M .

MATERIALS CHEMISTRY AND PHYSICS, 2003, 80 (02) :548-554

[6] Electrochemical oxidation of carbon fibres:: adsorption of the electrolyte and its effect on interfacial adhesion [J].

Százdi, L ;

Gulyás, J ;

Pukánszky, B .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2002, 33 (10) :1361-1365

[7] Surface modification of polytetrafluoroethylene by microwave plasma treatment of H2O/Ar mixture at low pressure [J].

Xu, H ;

Hu, Z ;

Wu, SH ;

Chen, Y .

MATERIALS CHEMISTRY AND PHYSICS, 2003, 80 (01) :278-282

[8]

Zou S. B., 1999, KEY ENG MATER, V164/165, P229

← 1 →