A new severe plastic deformation method by repetitive extrusion and upsetting

被引：28

作者：

Zaharia, L. ^{[1
]}

Comaneci, R. ^{[1
]}

Chelariu, R. ^{[1
]}

Luca, D. ^{[1
]}

机构：

[1] Gheorghe Asachi Tech Univ Iasi, Fac Mat Sci & Engn, Iasi 700050, Romania

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2014年 / 595卷

关键词：

Extrusion; Upsetting; Severe plastic deformation; Grain refinement; GRAIN-REFINEMENT; ALUMINUM; RATIO; ECAP; AL;

D O I：

10.1016/j.msea.2013.12.006

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

A novel ultra-high straining process, based on the combination of conventional direct extrusion followed by the upsetting of a cylindrical rod in several cycles of severe plastic deformation (SPD), is presented. This procedure, called repetitive extrusion and upsetting (REU), begins with the extrusion in order to elongate the grains. After extrusion, the specimen is upset until the initial diameter is reached again, so the direct extrusion process can be repeated. During extrusion and upsetting processes, the grains are fragmented along shearing planes. Four cycles of successive REU have been applied to commercial purity aluminum. The effective strain and the potential for grain refinement were evaluated. Preliminary microstructure investigations and mechanical properties evaluation of the processed specimen were carried out. (C) 2013 Elsevier B.V. All rights reserved.

引用

页码：135 / 142

页数：8

共 50 条

[1] Deformation behavior in Simple Shear Extrusion (SSE) as a new severe plastic deformation technique
Pardis, N.
Ebrahimi, R.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 527 (1-2): : 355 - 360
[2] Development of a new integrated severe plastic deformation method
Khandani, S. T.
Faraji, G.
Torabi, H.
MATERIALS SCIENCE AND TECHNOLOGY, 2020, 36 (04) : 468 - 476
[3] Repetitive forging (RF) using inclined punches as a new bulk severe plastic deformation method
Babaei, A.
Faraji, G.
Mashhadi, M. M.
Hamdi, M.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 558 : 150 - 157
[4] High Pressure Torsion Extrusion as a new severe plastic deformation process
Ivanisenko, Yu.
Kulagin, R.
Fedorov, V.
Mazilkin, A.
Scherer, T.
Baretzky, B.
Hahn, H.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 664 : 247 - 256
[5] Development of new routes of severe plastic deformation through cyclic expansion-extrusion process
Pardis, N.
Chen, C.
Shahbaz, M.
Ebrahimi, R.
Toth, L. S.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 613 : 357 - 364
[6] Novel severe plastic deformation technique-accumulated extrusion (AccumEx)
Muralidharan, G. K.
Verlinden, B.
MATERIALS SCIENCE AND TECHNOLOGY, 2016, 32 (06) : 547 - 555
[7] Hydrostatic Tube Cyclic Extrusion Compression as a Novel Severe Plastic Deformation Method for Fabricating Long Nanostructured Tubes
Eftekhari, M.
Faraji, G.
Bahrami, M.
Baniassadi, M.
METALS AND MATERIALS INTERNATIONAL, 2022, 28 (07) : 1725 - 1740
[8] A new severe plastic deformation methd: Twist extrusion
Beygelzimer, Y
Orlov, D
Varyukhin, V
ULTRAFINE GRAINED MATERIALS II, 2002, : 297 - 304
[9] Hydrostatic tube cyclic expansion extrusion (HTCEE) as a new severe plastic deformation method for producing long nanostructured tubes
Savarabadi, M. Motallebi
Faraji, G.
Zalnezhad, E.
JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 785 : 163 - 168
[10] On a novel severe plastic deformation method: severe forward extrusion (SFE)
Riahi, M.
Ehsanian, M. H.
Asgari, A.
Djavanroodi, F.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 93 (1-4) : 1041 - 1050

← 1 2 3 4 5 →