Precipitation behavior in Nb-Ti microalloyed HSLA steels

被引：0
|
作者：
Hong, SG [1 ]
Kang, KB [1 ]
Park, CG [1 ]
机构：
[1] Pohang Univ Sci & Technol, Ctr Adv Aerosp Mat, Dept Mat Sci & Engn, Pohang 790784, South Korea
来源：
MICROSTRUCTURE MODELING AND PREDICTION DURING THERMOMECHANICAL PROCESSING | 2001年
关键词：
D O I：
暂无
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
The precipitation behavior of NbC carbides has been investigated in both Nb steel and Nb-Ti steel. Precipitation-Time-Temperature (PTT) diagrams were obtained by measuring softening ratios at high temperatures from two-stage interrupted compression tests. It was found that both precipitation start time (P-s) and finish time (P-f) were delayed in the Nb-Ti steel compared to those of the Nb steel. After a reheating treatment, all the precipitates were dissolved in the Nb steel, but, in the Nb-Ti steel, undissolved (Ti,Nb)(C,N) carbonitrides were observed. In addition, after the first prestrain of 0.3 at test temperatures, (Nb,Ti)C carbides strarted to precipitate preferentially at the undissolved (Ti,Nb)(C,N) carbonitrides. The delayed matrix precipitation of NbC carbides observed in the Nb-Ti steel seemed to be the cause of insufficient amounts of soluble Nb in austenite. That is, in the Nb-Ti steel, a significant fraction of Nb was lost by both the undissolved (Ti,Nb)(C,N) carbonitrides and the consequent heterogeneous nucleation of (Nb,Ti)C carbides. Therefore, it is suggested that the lowered supersaturation of Nb can result in the delay of precipitation of strain-induced NbC carbides formed in the matrix of Nb-Ti steel.
引用
收藏
页码：115 / 124
页数：10
相关论文
共 50 条
  • [21] Development of Nb-Ti microalloyed steels for hot strip-rolling
    de, Melo, Mauricio P.S.
    Costa, Jorge A.S.
    Mello, Raul M.
    Silva, Marcio A.
    Cezar, Waldir
    Metalurgia, ABM (Associacao Brasileira de Metais), 1992, 48 (412):
  • [22] Dynamic recrystallization behavior covering a wide austenite grain size range in Nb and Nb-Ti microalloyed steels
    Fernández, AI
    Uranga, P
    López, B
    Rodriguez-Ibabe, JM
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 361 (1-2): : 367 - 376
  • [23] Evolution of textures in hot rolled Nb-Ti and V-Nb microalloyed steels
    Misra, RDK
    Anderson, JP
    MATERIALS SCIENCE AND TECHNOLOGY, 2002, 18 (12) : 1513 - 1516
  • [24] Tracing Microalloy Precipitation in Nb-Ti HSLA Steel during Austenite Conditioning
    Webel, Johannes
    Herges, Adrian
    Britz, Dominik
    Detemple, Eric
    Flaxa, Volker
    Mohrbacher, Hardy
    Muecklich, Frank
    METALS, 2020, 10 (02)
  • [25] Evolution of precipitates in Nb-Ti binary low-carbon microalloyed steels
    Luo, Yan-Zhao
    Zhang, Jiong-Ming
    Xiao, Chao
    Zhao, Xin-Yu
    Liu, Zhi-Ming
    Wu, Lian
    Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing, 2012, 34 (07): : 775 - 782
  • [26] Effect of Nb-Ti Microalloyed Steel Precipitation Behavior on Hot Rolling Strip Shape and FEM Simulation
    Li, Kaisheng
    Shao, Jian
    Yao, Chihuan
    Jia, Pan
    Xie, Shuhao
    Chen, Desheng
    Xiao, Min
    MATERIALS, 2024, 17 (03)
  • [27] COMPUTER-MODEL FOR PREDICTION OF CARBONITRIDE PRECIPITATION DURING HOT-WORKING IN NB-TI BEARING HSLA STEELS
    OKAGUCHI, S
    HASHIMOTO, T
    ISIJ INTERNATIONAL, 1992, 32 (03) : 283 - 290
  • [28] Effects of reheat conditions on the hot ductility of Nb-Ti and Ti-B microalloyed steels
    El-Wazri, AM
    Hassani, F
    Yue, S
    Es-Sadiqi, E
    Collins, LE
    Iqbal, K
    CANADIAN METALLURGICAL QUARTERLY, 2000, 39 (01) : 55 - 63
  • [29] Evolution, of precipitates in the Nb-Ti-V microalloyed HSLA steels during reheating
    Hong, SG
    Jun, HJ
    Kang, KB
    Park, CG
    SCRIPTA MATERIALIA, 2003, 48 (08) : 1201 - 1206
  • [30] MECHANICAL-PROPERTIES AND CHARACTERISTICS OF PRECIPITATES IN TI, NB-TI AND V-TI BEARING HSLA STEELS
    OKAGUCHI, S
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (05): : S467 - S467
12345