The Dual-Band PolInSAR Method for Forest Parametrization

There are basically two methods for retrieving the ground and the canopy height from interferometric synthetic aperture radar (InSAR) in forested areas. The first method is based on the difference between InSAR height estimations from dual-band (DB) systems, typically operating at X-and P-bands HH. The second method is based on the modeling of the polarimetric (Pol) InSAR response along the forest vertical structure, typically at L-or P-band. This paper proposes the combination of both methods, so that the ground and total tree height estimations are improved and become available alongside the interferometric forest height with the usage of polarimetric data and the RVoG model adoption in both bands. In the proposed method (DB-PolInSAR), first, the ground phase is retrieved from the RVoG inversion through a straightforward line fit of the P-Band polarimetric data in the complex plane. Fixing the ground height coming from the previous P-band inversion and applying the RVoG model to the X-band interferometric data, we estimate the total tree height. Repeat-pass dual-polarimetric (HH and HV) P-band data and single-pass three-baseline HH X-band data acquired with the airborne OrbiSAR sensor of Bradar over the Amazon region of Urucu are used to demonstrate the proposed method. Comparisons between the dual-band PolInSAR and the dual-band single-polarization cases are performed for five different P-band single-baseline configurations. Better ground estimation over range is obtained with the proposed method. Furthermore, the three-antenna single-pass X-band data enabled a robust RVoG total tree height inversion.