3D PRINTING OF FIBER REINFORCED SOFT ROBOTICS

被引：0

作者：

Yap, Yee Ling ^{[1
]}

Lee, Yi Wei ^{[2
]}

Yeong, Wai Yee ^{[1
]}

机构：

[1] Nanyang Technol Univ, Sch Mech & Aerosp Engn, Singapore Ctr 3D Printing, 50 Nanyang Ave, Singapore 439966, Singapore

[2] Nanyang Technol Univ, Sch Mech & Aerosp Engn, 50 Nanyang Ave, Singapore 439966, Singapore

来源：

PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON PROGRESS IN ADDITIVE MANUFACTURING | 2018年

关键词：

3D printing; additive manufacturing; 3D printed composites; multi-material inkjet printing; soft robotics; FABRICATION; CHALLENGES; DESIGN;

D O I：

10.25341/D4FK5K

中图分类号：

R318 [生物医学工程];

学科分类号：

0831 ;

摘要：

Soft robotics is a rapidly growing new field of robotics whereby the robots are fundamentally soft and elastically deformable. Many of the soft robotics are inspired by soft bodied animals, are made of intrinsically soft, extensible and highly compliant materials. In this paper, 3D inkjet-printed fiber reinforced soft composites were used to develop a pneumatic actuated soft robotics. The fiber reinforced soft composites are able to remain flexible yet strong due to the thin inextensible fibers embedded within the matrix. Then it is being adopted into designing a soft robotic which can perform controlled motion such as extension with varying air pressure. The potential and challenges of current 3D printed soft robotics will also be discussed.

引用

页码：631 / 636

页数：6

共 25 条

[1] Development of bendable strain sensor with embedded microchannels using 3D printing [J].

Agarwala, Shweta ;

Goh, Guo Liang ;

Yap, Yee Ling ;

Goh, Guo Dong ;

Yu, Hao ;

Yeong, Wai Yee ;

Tuan Tran .

SENSORS AND ACTUATORS A-PHYSICAL, 2017, 263 :593-599

[2] A 3D-printed, functionally graded soft robot powered by combustion [J].

Bartlett, Nicholas W. ;

Tolley, Michael T. ;

Overvelde, Johannes T. B. ;

Weaver, James C. ;

Mosadegh, Bobak ;

Bertoldi, Katia ;

Whitesides, George M. ;

Wood, Robert J. .

SCIENCE, 2015, 349 (6244) :161-165

[3] An octopus-bioinspired solution to movement and manipulation for soft robots [J].

Calisti, M. ;

Giorelli, M. ;

Levy, G. ;

Mazzolai, B. ;

Hochner, B. ;

Laschi, C. ;

Dario, P. .

BIOINSPIRATION & BIOMIMETICS, 2011, 6 (03)

[4] Measurement and modeling of McKibben pneumatic artificial muscles [J].

Chou, CP ;

Hannaford, B .

IEEE TRANSACTIONS ON ROBOTICS AND AUTOMATION, 1996, 12 (01) :90-102

[5]

Cohen E, 2015, DESIGN METHODOLOGIES

[6] Crack monitoring and failure investigation on inkjet printed sandwich structures under quasi-static indentation test [J].

Dikshit, Vishwesh ;

Nagalingam, Arun Prasanth ;

Yap, Yee Ling ;

Sing, Swee Leong ;

Yeong, Wai Yee ;

Wei, Jun .

MATERIALS & DESIGN, 2018, 137 :140-151

[7] Investigation of Quasi-Static Indentation Response of Inkjet Printed Sandwich Structures under Various Indenter Geometries [J].

Dikshit, Vishwesh ;

Nagalingam, Arun Prasanth ;

Yap, Yee Ling ;

Sing, Swee Leong ;

Yeong, Wai Yee ;

Wei, Jun .

MATERIALS, 2017, 10 (03)

[8]

Drotman Dylan, 2017, 2017 IEEE INT C ROB

[9]

Galloway KC, 2013, 2013 16TH INTERNATIONAL CONFERENCE ON ADVANCED ROBOTICS (ICAR)

[10] Soft Robotics: Challenges and Perspectives [J].

Iida, Fumiya ;

Laschi, Cecilia .

PROCEEDINGS OF THE 2ND EUROPEAN FUTURE TECHNOLOGIES CONFERENCE AND EXHIBITION 2011 (FET 11), 2011, 7 :99-102

← 1 2 3 →