Role of Cl- and NO3- ions on the corrosion behavior of 20% SiCp reinforced 6061-Al metal matrix composite: A correlation between electrochemical studies and atomic force microscopy

被引：26

作者：

Datta, J. ^{[1
]}

Samanta, B. ^{[1
]}

Jana, A. ^{[1
]}

Sinha, S. ^{[2
]}

Bhattacharya, C. ^{[1
]}

Bandyopadhyay, S. ^{[3
]}

机构：

[1] Bengal Engn & Sci Univ, Dept Chem, Shibpur Howrah 711103, W Bengal, India

[2] Mahadevananda Mahavidyalaya, Dept Chem, Barakpur, W Bengal, India

[3] Univ New S Wales, Sch Mat Sci & Engn, Sydney, NSW 2052, Australia

来源：

CORROSION SCIENCE | 2008年 / 50卷 / 09期

关键词：

Metal matrix composite; AFM; EIS; Pitting corrosion; Passive film;

D O I：

10.1016/j.corsci.2008.06.027

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Effect of Cl- and NO3- ions on the corrosion behavior of 20% SiCp reinforced 6061-Al metal matrix composite has been studied using techniques like immersion, potentiostatic polarization, electrochemical impedance spectroscopy and scanning electron microscopy. The present investigation also identifies atomic force microscopy as one of the informative tools to reveal the extent of corrosion with a semi-quantitative approach. The corrosion parameters derived from different techniques revealed that the accelerated corrosion by Cl- is considerably suppressed in presence of NO3- in the medium. The NO3- ions can afford corrosion resistance to the matrix even in aerated conditions by autocatalytic conversion to nitrite and thereby suppresses the accompanying oxygen reduction reaction. (C) 2008 Elsevier Ltd. All rights reserved.

引用

页码：2658 / 2668

页数：11

共 47 条

[1]

AYLOR DM, 1987, METALS HDB

[2] THE ELECTROCHEMICAL-BEHAVIOR AND CORROSION OF ALUMINUM IN CHLORIDE MEDIA - THE EFFECT OF INHIBITOR ANIONS [J].

BRETT, CMA ;

GOMES, IAR ;

MARTINS, JPS .

CORROSION SCIENCE, 1994, 36 (06) :915-&

[3] Influence of anions on the corrosion of high speed steel [J].

Brett, CMA ;

Melo, PIC .

JOURNAL OF APPLIED ELECTROCHEMISTRY, 1997, 27 (08) :959-964

[4] Microstructural development and mechanical properties of interrupted aged Al-Mg-Si-Cu alloy [J].

Buha, J. ;

Lumley, R. N. ;

Crosky, A. G. .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2006, 37A (10) :3119-3130

[5] Microstructure-properties relationshop in two Al-Mg-Si alloys through a combination of extrusion andaging [J].

Cai, M. ;

Cheng, Gary J. .

JOM, 2007, 59 (08) :58-61

[6] THE USE OF SCANNING AUGER MICROSCOPY TO LOCATE CATHODIC CENTERS IN SICP/6061 AL MMC AND TO DETERMINE THE CURRENT-DENSITY AT WHICH THEY OPERATE [J].

CASTLE, JE ;

SUN, L ;

YAN, H .

CORROSION SCIENCE, 1994, 36 (06) :1093-&

[7] Characterisation by X-ray absorption near-edge spectroscopy of KMnO4-based no-rinse conversion coatings on Al and Al alloys [J].

Danilidis, I. ;

Davenport, A. J. ;

Sykes, J. M. .

CORROSION SCIENCE, 2007, 49 (04) :1981-1991

[8] DSC AND DMA STUDIES OF PARTICULATE-REINFORCED METAL-MATRIX COMPOSITES [J].

DAS, T ;

BANDYOPADHYAY, S ;

BLAIRS, S .

JOURNAL OF MATERIALS SCIENCE, 1994, 29 (21) :5680-5688

[9] Synthesis and characterization of electro-crystallized Cd-Sn-Se semiconductor films for application in non-aqueous photoelectrochemical solar cells [J].

Datta, J. ;

Bhattacharya, C. ;

Bandyopadhyay, S. .

APPLIED SURFACE SCIENCE, 2006, 252 (20) :7493-7502

[10] Influence of Cl-, Br-, NO-3 and SO2-4 ions on the corrosion behaviour of 6061 Al alloy [J].

Datta, J ;

Bhattacharya, C ;

Bandyopadhyay, S .

BULLETIN OF MATERIALS SCIENCE, 2005, 28 (03) :253-258

← 1 2 3 4 5 →